2020-2027 C8 Corvette Stingray Carbon Fiber Front Intake Vents

The front intake vents on a C8 Stingray are painted plastic dressed up to look like carbon, sitting right at eye level on the most photographed angle of the car.

This is a direct replacement, not a modification. The vents mount to your factory tab locations using your existing hardware, with no bumper removal required — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.

Built from autoclaved 2x2 pre-preg dry carbon fiber in a 3K 2x2 twill weave that matches the factory carbon look, and sold as a matched pair, driver and passenger side.

Finishes the front alongside the Carbon Fiber Front Spoiler, and is included in the Stingray Carbon Fiber Exterior Kit.

Front bumper opening geometry varies across C8 trims, so this pair is fit-verified for Stingray only — not confirmed for Z06, E-Ray or Grand Sport at this time. Please confirm your exact trim before ordering.

Why Autoclave Pre-Preg Dry Carbon Fiber

Pre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.

These sit at the front corners of the car where stone chips land first, and they are close enough to eye level that surface quality is judged from two feet away rather than across a parking lot.

Available Carbon Finishes

• Gloss (Standard) — our standard high-gloss 2x2 twill weave
• Matte Carbon — same weave, low-sheen matte finish
• Red Carbon — red-tinted carbon weave
• Blue Carbon — blue-tinted carbon weave
• Forged Carbon — marbled, high-strength forged carbon pattern

Please note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.

Current Lead Time

Current estimated lead time is approximately 55-65 business days from order to ship.