The TRX put a supercharged 6.2L Hemi in a half-ton truck and built the rest of the truck around it — wide fenders, a scooped hood, and a front end designed to move air over that blower. The panels covering all of it are still painted plastic. This kit replaces the eight most visible ones at once.
Every piece is an OEM+ direct replacement built from autoclaved 2x2 pre-preg dry carbon fiber, engineered around your factory mounting points and installed with your existing hardware.
What's Included
- Hood Vents — FRL-TRXHV
- Fender Vents — FRL-TRXFV
- Air Intake Hood Scoop — FRL-TRXAIHS
- Taillight Surrounds — FRL-TRXTS
- Headlight Surrounds — FRL-TRXHS
- Engine Cover — FRL-TRXEC
- Front Grille Upper Trim — FRL-TRXFGU
- Front Grille Lower Trim — FRL-TRXFGL
Why Autoclave Pre-Preg Dry Carbon Fiber
Pre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface.
On a full kit there is a second reason it matters. Order these eight parts one at a time over a year and you are taking eight separate production runs, with whatever drift that brings in weave angle and gloss. Ordered together they are built and finished together — so the carbon on your hood, your fenders, your grille, and your tailgate reads as one continuous material across the whole truck instead of eight parts that nearly match.
Available Carbon Finishes
- Gloss (Standard) — our standard high-gloss 2x2 twill weave
- Matte Carbon — same weave, low-sheen matte finish
- Red Carbon — red-tinted carbon weave
- Blue Carbon — blue-tinted carbon weave
- Forged Carbon — marbled, high-strength forged carbon pattern
Please note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.
Installation Notes
Every panel in this kit is a direct replacement, not a modification. All eight mount to the factory points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.
We recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.
Current Lead Time
Current estimated lead time is approximately 65-75 business days from order to ship.
RAM 1500 TRX Fitment
2021-2024 RAM 1500 TRX
2027+ RAM 1500 TRX SRT
Please note that all products must be installed by a professional. Minor adjustments may be required during installation, which are typical procedures and not indicative of defects. Additionally, please be aware that most carbon fiber products are handmade, resulting in slight variations between items.
Reviews
You may also like
Request a quote
Tell us about your vehicle and our team will get back to you shortly.
