2020-2027 Chevrolet Corvette C8 Carbon Fiber Rear Camera Cover (Stingray, Z06, E-Ray, Grand Sport) - Coupe

The rear hatch on a C8 Coupe is loaded with detail, and the rear camera cover is the one spot everybody overlooks — until they see it done in carbon.

This is a direct replacement, not a modification. The cover mounts to the factory clips and mounting locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.

Built from autoclaved 2x2 pre-preg dry carbon fiber in a 3K 2x2 twill weave designed to match the factory carbon look. This is a true replacement, not a taped-on overlay sitting on top of the factory cover, and it includes a 3D printed camera receiver to keep your rear camera properly aligned.

Finishes the rear deck alongside the Carbon Fiber Engine Hatch Vents and Carbon Fiber Lower Engine Hatch Trim. Pairs naturally with the Carbon Fiber Mirror Caps.

Coupe only — does not fit C8 Convertible models.

Why Autoclave Pre-Preg Dry Carbon Fiber

Pre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.

This part has to hold a camera in precise alignment while looking like trim. Dimensional stability through the cure is the whole job here, and that is exactly what an autoclave gives you over a hand layup.

Available Carbon Finishes

• Gloss (Standard) — our standard high-gloss 2x2 twill weave
• Matte Carbon — same weave, low-sheen matte finish
• Red Carbon — red-tinted carbon weave
• Blue Carbon — blue-tinted carbon weave
• Forged Carbon — marbled, high-strength forged carbon pattern

Please note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.

Current Lead Time

Current estimated lead time is approximately 55-65 business days from order to ship.