2021-2028 RAM 1500 TRX, RHO and TRX SRT dry carbon fiber fender vents, matched pair
2021-2028 RAM 1500 TRX, RHO and TRX SRT dry carbon fiber fender vents, matched pair
Feral Auto

2021-2028 RAM 1500 Carbon Fiber Fender Vents (TRX, RHO, TRX SRT)

SKU: FRL-TRXFV

$749.99
/
  • Fitment guaranteed
  • Free shipping within the lower 48 states

Current lead time is approximately 13-15 weeks from order to ship.
Orders may ship sooner depending on available stock

2021-2028 RAM 1500 Carbon Fiber Fender Vents (TRX, RHO, TRX SRT)

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Get help

Questions before you order? Our team is ready to help. Contact Us or Chat with us now.

This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

The fenders on the 2021-2024 RAM 1500 TRX, the 2025-2026 RHO and the 2027-2028 TRX SRT are already flared and aggressive — these finish the job. Feral Auto's OEM+ carbon replacements for the factory fender vents, sold as a matched pair so both sides get the same look.

Built from autoclaved 2x2 pre-preg dry carbon fiber, they are direct OEM replacements for the factory parts: same openings, same mounting points, same hardware. They carry the same vented, scooped language as the rest of the truck's body lines in real dry carbon, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and moisture at fender height. One part number covers all three trucks: the fender vent openings are the same on the TRX, the RHO and the TRX SRT.

Runs with the Hood Vents and Air Intake Hood Scoop on the panel above them.

Included in both the TRX Exterior Kit and the RHO & TRX SRT Exterior Kit. See everything we build for each truck in the RAM 1500 TRX, RAM 1500 RHO and RAM 1500 TRX SRT collections.

Fits the 2021-2024 RAM 1500 TRX, the 2025-2026 RHO and the 2027-2028 TRX SRT.

Why Autoclave Pre-Preg Dry Carbon Fiber

Pre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.

Fender height is where the truck throws everything it picks up. Road spray, grit, and salt hit these parts from below at speed, and moisture sitting against a laminate with trapped air in it is how a carbon part starts to lift at the edges. A consolidated pre-preg laminate under a UV-inhibited clear coat gives it far less of a way in. Both vents are finished and packaged together so the pair matches.

Please note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.

This is a direct replacement, not a modification. The vents fit the factory fender vent openings using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.

Please note that all products must be installed by a professional. Minor adjustments may be required during installation and are not indicative of defects. Additionally, please be aware that most carbon fiber products are handmade, resulting in slight variations between items.

Free standard shipping on all orders delivered within the 48 contiguous United States.

In-stock parts are prepared for shipment within 1–3 business days. If a part is not currently in stock, the lead time shown under the Add to Cart button applies. Once a shipment leaves our facility, most orders arrive within 3–7 business days, and freight shipments within 5–10 business days.

We also ship to Alaska, Hawaii, U.S. territories, APO/FPO/DPO addresses and internationally by quote — contact us before ordering. Full details in our Shipping policy.

Returns require our approval. Contact us within 5 days of receiving your item to request one. Approved returns are subject to a 30% restocking fee plus return shipping, and original shipping is non-refundable.

Items that have been installed, used or modified cannot be returned. Non-standard carbon finishes are non-returnable once the order has been placed.

If we shipped the wrong part or it has a manufacturing defect, there is no fee and we cover return shipping. Damage in transit must be reported within 24 hours of delivery — see our Shipping policy. Carbon components carry a 6-month structural and finish warranty. Full details in our Refund policy.