{"title":"Carbon Fiber Vents \u0026 Ducts","description":"\u003cp\u003eBumper ducts, fender vents and side intakes are the details that read as functional rather than decorative. From the factory they are painted black plastic that disappears from three feet away.\u003c\/p\u003e\n\u003cp\u003eDirect replacements for the factory pieces across the Corvette C8, BMW M3\/M4 and M2, RAM 1500 TRX and RHO, and the Ford F-150 Raptor. Sold as matched pairs where the vehicle takes two, finished together so the weave and gloss agree side to side.\u003c\/p\u003e\n\u003cp\u003eDucts carry a lot of internal geometry — tight radii, deep returns, edges that wrap out of sight — so these are the parts where consolidation shows.\u003c\/p\u003e","products":[{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Quarter Panel Door Handle\/Side Scoop (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8's quarter panel door handle doubles as the side scoop feeding the engine — one of the most distinctive details on the Z06, E-Ray, and Grand Sport, and one of the few places carbon reads as functional rather than decorative.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The scoops mount to the factory quarter panel locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and sold as a pair, driver and passenger side, finished together so the weave matches across the car.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e down the flanks, and is included in the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06\"\u003eCarbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThis part sits right where hands, door edges and shopping bags find it. A deep compound scoop shape is also the kind of geometry where a hand-laid part shows every inconsistency in the laminate at the transitions.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":48019043254516,"sku":"FRL-C8ZQPSS","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49278029955316,"sku":"FRL-C8ZQPSS-MTE","price":1599.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49278029988084,"sku":"FRL-C8ZQPSS-RED","price":1699.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49278030020852,"sku":"FRL-C8ZQPSS-BLU","price":1699.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":48019043287284,"sku":"FRL-C8ZQPSS-FRG","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2023-2024-Chevrolet-Corvette-C8-Carbon-Fiber-Quarter-Panel-Door-Handle-Side-Scoop_1_cb16b36c-45fa-492e-a846-ef08c2ba3404.jpg?v=1776718288"},{"product_id":"ram-trx-rho-carbon-fiber-fender-vents","title":"2021-2027 RAM 1500 Carbon Fiber Fender Vents (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO's fenders are already flared and aggressive — these finish the job. Feral Auto's OEM+ carbon replacements for the factory fender vents, sold as a matched pair so both sides get the same look.\u003c\/p\u003e\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory parts: same openings, same mounting points, same hardware. They carry the same vented, scooped language as the rest of the truck's body lines in real dry carbon, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and moisture at fender height. One part number covers both the TRX and the RHO.\u003c\/p\u003e\u003cp\u003eRuns with the \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents\"\u003eHood Vents\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-air-intake-hood-scoop\"\u003eAir Intake Hood Scoop\u003c\/a\u003e on the panel above them.\u003c\/p\u003e\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\u003cp\u003eFender height is where the truck throws everything it picks up. Road spray, grit, and salt hit these parts from below at speed, and moisture sitting against a laminate with trapped air in it is how a carbon part starts to lift at the edges. A consolidated pre-preg laminate under a UV-inhibited clear coat simply does not give it a way in. Both vents are finished and packaged together so the pair matches.\u003c\/p\u003e\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276474753268,"sku":"FRL-TRXFV","price":749.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590620916,"sku":"FRL-TRXFV-MTE","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590686452,"sku":"FRL-TRXFV-RED","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590719220,"sku":"FRL-TRXFV-BLU","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590653684,"sku":"FRL-TRXFV-FRG","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxfendervents2.jpg?v=1788556322"},{"product_id":"c8-corvette-stingray-carbon-fiber-front-intake-vents","title":"2020-2027 C8 Corvette Stingray Carbon Fiber Front Intake Vents","description":"\u003cp\u003eThe front intake vents on a C8 Stingray are painted plastic dressed up to look like carbon, sitting right at eye level on the most photographed angle of the car.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents mount to your factory tab locations using your existing hardware, with no bumper removal required — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look, and sold as a matched pair, driver and passenger side.\u003c\/p\u003e\n\u003cp\u003eFinishes the front alongside the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-front-spoiler\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e, and is included in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFront bumper opening geometry varies across C8 trims, so this pair is fit-verified for Stingray only — not confirmed for Z06, E-Ray or Grand Sport at this time. Please confirm your exact trim before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThese sit at the front corners of the car where stone chips land first, and they are close enough to eye level that surface quality is judged from two feet away rather than across a parking lot.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276688335092,"sku":"FRL-C8SIV","price":599.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276688367860,"sku":"FRL-C8SIV-MTE","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276688433396,"sku":"FRL-C8SIV-RED","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276688466164,"sku":"FRL-C8SIV-BLU","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276688400628,"sku":"FRL-C8SIV-FRG","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8frontintakevents.jpg?v=1789079690"},{"product_id":"2021-2027-bmw-m3-m4-carbon-fiber-front-bumper-ducts-g80-g82-g83","title":"2021-2027 BMW M3\/M4 Carbon Fiber Front Bumper Ducts (G80, G82, G83)","description":"\u003cp\u003eThe G8X bumper already has the intake openings cut into it. From the factory they're filled with black plastic fins that disappear from three feet away.\u003c\/p\u003e\n\u003cp\u003eThese replace them with a single-fin motorsport profile in \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, sold as a matched pair, driver and passenger side.\u003c\/p\u003e\n\u003cp\u003eSits either side of the \u003ca href=\"\/products\/2021-2027-bmw-m3-m4-csl-style-carbon-fiber-grille-with-acc-g80-g82-g83\"\u003eCSL-Style Grille\u003c\/a\u003e and below the \u003ca href=\"\/products\/2021-2027-bmw-m3-m4-carbon-fiber-front-spoiler-g80-g82-g83\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e. All three come together in the \u003ca href=\"\/products\/2021-2027-bmw-m3-m4-carbon-front-end-bundle-kit-g80-g82-g83\"\u003eCarbon Front End Bundle Kit\u003c\/a\u003e. Directly behind the bumper, the \u003ca href=\"\/products\/2021-2027-bmw-m3-m4-carbon-fiber-radiator-cooling-shroud-g80-g82-g83\"\u003eCarbon Fiber Radiator Cooling Shroud\u003c\/a\u003e carries the same weave into the engine bay.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA duct fin is a thin, deep, sharply folded shape — the geometry most likely to show print-through or a resin-rich edge when it's laid by hand. Consolidation under pressure is what keeps the fin edge crisp.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e25-35 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276930326772,"sku":"FRL-G8XFBD","price":749.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276930359540,"sku":"FRL-G8XFBD-MTE","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$200)","offer_id":49276930392308,"sku":"FRL-G8XFBD-FRG","price":949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/FrontDucts.jpg?v=1789141575"},{"product_id":"2023-2027-bmw-m2-carbon-fiber-front-bumper-ducts-g87","title":"2023-2027 BMW M2 Carbon Fiber Front Bumper Ducts (G87)","description":"\u003cp\u003eThe ducts at the outer corners of the G87's front bumper are painted black plastic, and on a car this compact they sit right in the line of sight.\u003c\/p\u003e\u003cp\u003eA direct replacement for the factory ducts, built from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e. Sold as a matched pair, left and right, finished together so the weave and gloss match side to side.\u003c\/p\u003e\u003cp\u003eSits below the \u003ca href=\"\/products\/2023-2027-bmw-m2-cs-style-carbon-fiber-front-grille-g87\"\u003eCS-Style Carbon Fiber Front Grille\u003c\/a\u003e and beside the \u003ca href=\"\/products\/2023-2027-bmw-m2-carbon-fiber-front-bumper-vent-trim-g87\"\u003eFront Bumper Vent Trim\u003c\/a\u003e. All three plus the front spoiler come together in the \u003ca href=\"\/products\/2023-2027-bmw-m2-carbon-front-end-bundle-kit-g87\"\u003eCarbon Front End Bundle Kit\u003c\/a\u003e. Directly behind them, the \u003ca href=\"\/products\/2023-2027-bmw-m2-carbon-fiber-radiator-cooling-shroud-g87\"\u003eCarbon Fiber Radiator Cooling Shroud\u003c\/a\u003e carries the same weave into the engine bay.\u003c\/p\u003e\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\u003cp\u003eDucts are small parts carrying a lot of internal geometry — tight radii, deep returns, and edges that wrap out of sight. Those are exactly the areas autoclave pressure reaches, so the laminate consolidates as evenly in the corners as it does on the face.\u003c\/p\u003e\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e25-35 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276995764468,"sku":"FRL-G87FBD","price":649.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276995797236,"sku":"FRL-G87FBD-MTE","price":724.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$200)","offer_id":49276995830004,"sku":"FRL-G87FBD-FRG","price":849.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/FrontDucts_1.jpg?v=1789141797"},{"product_id":"2021-2027-ford-f-150-raptor-carbon-fiber-fender-vents","title":"2021-2027 Ford F-150 Carbon Fiber Fender Vents (Raptor, Raptor R)","description":"\u003cp\u003eThe F-150 Raptor and Raptor R are built around a stance nothing else in the half-ton segment has — wide fenders, long-travel suspension, and bodywork shaped for desert speed. The fender vents sitting in the middle of all that are still painted plastic. These are Feral Auto's OEM+ carbon replacements for them, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory parts: same openings, same mounting points, same hardware. Finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and whatever the front tires throw at fender height. One part number covers both the Raptor and the Raptor R.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-hood-vent-trim\"\u003eRaptor Hood Vent \u0026amp; Trim\u003c\/a\u003e, or the \u003ca href=\"\/products\/2023-2027-ford-f-150-raptor-r-carbon-fiber-hood-vent-trim\"\u003eRaptor R Hood Vent \u0026amp; Trim\u003c\/a\u003e if you're running the R.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eFender height on a Raptor is the hardest place on the truck to put a part. It sits directly in the spray off a 35-inch tire, taking grit, salt and standing water from below at speed. Moisture working into a laminate with trapped air in it is how a carbon part starts lifting at the edges — a consolidated pre-preg part under a UV-inhibited clear coat does not give it the opening. Both vents are finished and packaged together so the pair matches.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49277915988212,"sku":"FRL-RPTRFV","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49277916020980,"sku":"FRL-RPTRFV-MTE","price":1074.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49277916086516,"sku":"FRL-RPTRFV-RED","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49277916119284,"sku":"FRL-RPTRFV-BLU","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49277916053748,"sku":"FRL-RPTRFV-FRG","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/FENDERVENT.jpg?v=1789178725"},{"product_id":"chevrolet-corvette-c8-carbon-fiber-boomerang-engine-intake-side-vents-stingray","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Boomerang Engine Intake Side Vents (Stingray)","description":"\u003cp\u003eThe C8 Stingray has some of the most distinctive lines in the game, and the side intake vents sit right in the middle of that look. Enthusiasts call them the boomerangs.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents replace the factory side intake trim at the OEM attachment points on your doors and fenders using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look. Four pieces total, two per side, finished together so the weave matches across the car. These are true replacements, not stick-on overlays covering what is underneath.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-side-skirts\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e down the flanks, and is included in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThese parts span the gap between a door and a fender, which means they have to hold their shape against two panels that move independently. A four-piece set also has to agree with itself across the car, and that comes from curing them in one run.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49288212578548,"sku":"FRL-C8SQPSS","price":1299.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49288212644084,"sku":"FRL-C8SQPSS-MTE","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49288212676852,"sku":"FRL-C8SQPSS-RED","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49288212709620,"sku":"FRL-C8SQPSS-BLU","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49288212611316,"sku":"FRL-C8SQPSS-FRG","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8handlecover_sidescooptrim.jpg?v=1789097665"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/collections\/C8handlecover_sidescooptrim.jpg?v=1789604918","url":"https:\/\/feralauto.com\/collections\/vents-ducts.oembed","provider":"Feral Auto","version":"1.0","type":"link"}