{"title":"RAM 1500 TRX SRT Carbon Fiber Parts","description":"\u003cp\u003e\u003cstrong\u003eCarbon Fiber Parts for the 2027 RAM 1500 TRX SRT\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TRX SRT puts the supercharged 6.2L Hemi back in Ram's half-ton lineup, wrapped in the most aggressive factory bodywork they build. Every panel that makes it look that way — the hood vents, the scoop, the fender vents, the grille — is still painted plastic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe useful thing to know first:\u003c\/strong\u003e the TRX SRT carries the same panel geometry as the 2021-2024 TRX. That means nothing here is a first-run part being developed against a new platform while you wait on it. The molds exist, the fitment is proven across four model years of trucks, and the finish is dialed in. You are not beta-testing parts on a new truck.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhere to start.\u003c\/strong\u003e The hood is what people see first, and it's where carbon reads loudest — the \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents-pair\"\u003eHood Vents\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-air-intake-hood-scoop\"\u003eAir Intake Hood Scoop\u003c\/a\u003e change the truck's presence more per dollar than anything else on this page. The \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-fender-vents-pair\"\u003eFender Vents\u003c\/a\u003e come next, because they tie the hood into the flares instead of leaving the carbon looking like a one-panel add-on. From there it's the front end — \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-upper-trim-oe-style\"\u003eUpper\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-lower-trim-oe-style\"\u003eLower Grille Trim\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-carbon-fiber-headlight-surrounds-oe-style-pair\"\u003eHeadlight Surrounds\u003c\/a\u003e — then the \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-tail-light-surrounds-pair\"\u003eTail Light Surrounds\u003c\/a\u003e to close the back, and the \u003ca href=\"\/products\/ram-trx-carbon-fiber-engine-cover-2021-2024-oe-style\"\u003eEngine Cover\u003c\/a\u003e for whoever pops the hood at a meet — which, with a supercharged 6.2 under it, is most people.\u003c\/p\u003e\n\u003cp\u003eOr take all eight at once with the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eCarbon Fiber Exterior Kit\u003c\/a\u003e. Ordered together they're built and finished in one production run, so the weave and gloss match panel to panel across the whole truck — which is hard to get back if you buy them one at a time over a year.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinishes.\u003c\/strong\u003e Gloss is standard. Matte, Red, Blue, and Forged Carbon are available on every part, with exact upgrade pricing shown on each listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation.\u003c\/strong\u003e Every part here mounts to the factory attachment points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included because none is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRunning a 2021-2024 TRX or a 2025-2026 RHO? See the \u003ca href=\"\/collections\/ram-1500-trx\"\u003eRAM 1500 TRX collection\u003c\/a\u003e or the \u003ca href=\"\/collections\/ram-1500-rho\"\u003eRAM 1500 RHO collection\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"ram-trx-carbon-fiber-engine-cover-2021-2027","title":"2021-2027 RAM 1500 Carbon Fiber Engine Cover (TRX, TRX SRT)","description":"\u003cp\u003ePop the hood on your TRX and it should look as serious as it drives. The factory plastic engine cover does nothing for a truck packing a supercharged 6.2L Hemi — this is Feral Auto's OEM+ replacement for it.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, this engine cover is a direct OEM replacement for the factory panel: same mounting points, same hardware, upgraded material. It drops unnecessary weight off the top of the engine and gives your TRX the show-quality bay it deserves the moment someone lifts the hood, finished with a polished automotive-grade clear coat with UV inhibitors that resists yellowing and clouding for years.\u003c\/p\u003e\n\u003cp\u003eBuilding the whole truck? The \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Carbon Fiber Exterior Kit\u003c\/a\u003e includes this engine cover plus seven more panels.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eUnder the hood that matters more than most places on the truck. An engine bay cycles between ambient and serious heat every single drive, and a properly consolidated laminate takes that cycling without the surface defects a resin-rich part will eventually show.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The engine cover mounts to the factory points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276410102004,"sku":"FRL-TRXEC","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276410134772,"sku":"FRL-TRXEC-MTE","price":874.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276586000628,"sku":"FRL-TRXEC-RED","price":949.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276586033396,"sku":"FRL-TRXEC-BLU","price":949.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276585967860,"sku":"FRL-TRXEC-FRG","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxhoodscoop.jpg?v=1788556083"},{"product_id":"ram-trx-carbon-fiber-grille-upper-trim","title":"2021-2027 RAM 1500 Carbon Fiber Front Grille Upper Trim (TRX, TRX SRT)","description":"\u003cp\u003eThe TRX has the most aggressive face in the segment — the upper grille shouldn't be the one piece that still looks stock. This is Feral Auto's OEM+ carbon replacement for it.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, this upper grille trim is a direct OEM replacement for the factory panel: same opening, same mounting points, same hardware. It turns the front end into a statement without altering a single line of the truck's factory geometry, finished with a polished automotive-grade clear coat with UV inhibitors that keeps the weave deep and glossy for years.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-lower-trim-oe-style\"\u003eFront Grille Lower Trim\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-carbon-fiber-headlight-surrounds-oe-style-pair\"\u003eHeadlight Surrounds\u003c\/a\u003e for a full front-end carbon build, or take all eight panels in the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eOn the panel that meets highway debris first, that consolidation is structural and not just cosmetic. A densely packed laminate resists chips and flex far better than a resin-rich wet-layup part carrying air in the weave — and it holds a flat, even weave pattern across a wide panel where any inconsistency would be obvious.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The trim sits into the factory grille opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276455420148,"sku":"FRL-TRXFGU","price":1199.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276589342964,"sku":"FRL-TRXFGU-MTE","price":1274.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276589408500,"sku":"FRL-TRXFGU-RED","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276589441268,"sku":"FRL-TRXFGU-BLU","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276589375732,"sku":"FRL-TRXFGU-FRG","price":1449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxuppergrille.jpg?v=1788556112"},{"product_id":"ram-trx-carbon-fiber-grille-lower-trim","title":"2021-2027 RAM 1500 Carbon Fiber Front Grille Lower Trim (TRX, TRX SRT)","description":"\u003cp\u003eAn aggressive upper grille means nothing if the lower half of your TRX's face still looks stock. This is Feral Auto's OEM+ carbon replacement for the lower panel — the piece that finishes what the upper trim started.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, this lower grille trim is a direct OEM replacement for the factory panel: same opening, same mounting points, same hardware. It completes the front-end transformation without touching the truck's factory geometry, finished with a polished automotive-grade clear coat with UV inhibitors sized for the extra road debris and sun a lower panel takes on.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-upper-trim-oe-style\"\u003eFront Grille Upper Trim\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-carbon-fiber-headlight-surrounds-oe-style-pair\"\u003eHeadlight Surrounds\u003c\/a\u003e, or take all eight panels in the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eNo panel on this truck lives harder than the lower grille. It sits directly in the path of gravel, salt spray, and standing water, and it catches sun at an angle all day. A consolidated pre-preg laminate under a UV-inhibited clear coat is the difference between a panel that still looks right in three years and one that has gone cloudy at the leading edge.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The trim sits into the factory lower grille opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276462399732,"sku":"FRL-TRXFGL","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276589572340,"sku":"FRL-TRXFGL-MTE","price":1074.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276589637876,"sku":"FRL-TRXFGL-RED","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276589670644,"sku":"FRL-TRXFGL-BLU","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276589605108,"sku":"FRL-TRXFGL-FRG","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxlowergrille.jpg?v=1788556138"},{"product_id":"ram-trx-carbon-fiber-headlight-surrounds","title":"2021-2027 RAM 1500 Carbon Fiber Headlight Surrounds (TRX, TRX SRT)","description":"\u003cp\u003eA carbon fiber grille loses half its impact if the headlights on either side of it still look stock. These are Feral Auto's OEM+ carbon replacements for the factory headlight surrounds, sold as a matched pair so both sides get the same treatment.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They frame your TRX's headlights in real dry carbon, sharpening the front end and tying grille, headlights, and hood into one look — finished with a polished automotive-grade clear coat with UV inhibitors that keeps the gloss deep right where people look first.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-upper-trim-oe-style\"\u003eFront Grille Upper\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-lower-trim-oe-style\"\u003eFront Grille Lower Trim\u003c\/a\u003e, or take all eight panels in the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eOn a matched pair, process consistency is the whole game. Two panels sitting a few feet apart on the same face of the truck will show any difference in weave angle or gloss level immediately. Autoclave curing produces a repeatable result part to part, and we finish and package both surrounds together so the pair leaves as a pair.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The surrounds sit into the factory headlight openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276467871988,"sku":"FRL-TRXHS","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276589801716,"sku":"FRL-TRXHS-MTE","price":874.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276589867252,"sku":"FRL-TRXHS-RED","price":949.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276589900020,"sku":"FRL-TRXHS-BLU","price":949.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276589834484,"sku":"FRL-TRXHS-FRG","price":1049.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxheadlight2.jpg?v=1788556174"},{"product_id":"ram-trx-rho-carbon-fiber-tail-light-surrounds","title":"2021-2027 RAM 1500 Carbon Fiber Tail Light Surrounds (TRX, RHO, TRX SRT)","description":"\u003cp\u003eA carbon front end deserves a rear end that matches it. These are Feral Auto's OEM+ carbon replacements for the factory tail light surrounds on the TRX and RHO, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They give the back of the truck the same built-not-bought presence you have already put up front, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun and weather at the rear of the truck.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eThe tailgate end of a truck takes a particular kind of abuse — road spray thrown up off the rear tires, standing water, and whatever the bed is carrying. A consolidated laminate with no trapped air gives moisture nowhere to work its way in behind the clear coat. Both surrounds are finished and packaged together so weave alignment and gloss match side to side.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The surrounds sit into the factory tail light openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276470165748,"sku":"FRL-TRXTS","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590063860,"sku":"FRL-TRXTS-MTE","price":924.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590129396,"sku":"FRL-TRXTS-RED","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590162164,"sku":"FRL-TRXTS-BLU","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590096628,"sku":"FRL-TRXTS-FRG","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/taillightsurrounds2.jpg?v=1788556222"},{"product_id":"ram-trx-rho-carbon-fiber-air-intake-hood-scoop","title":"2021-2027 RAM 1500 Carbon Fiber Air Intake Hood Scoop (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO already look aggressive from the factory — a carbon fiber hood scoop makes it unmistakable. This is Feral Auto's OEM+ carbon replacement for the factory scoop.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, it is a direct OEM replacement for the factory part: same hood opening, same scoop cutout, same mounting points and hardware. It gives the most visible feature on the hood a show-quality finish without changing the aggressive factory silhouette, finished with a polished automotive-grade clear coat with UV inhibitors built for constant, direct sun. One part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eNothing on this truck sees more direct sun than the top of the hood. It sits flat to the sky all day, every day, and it is also the panel an owner looks at most. That combination is exactly where a poorly consolidated laminate gives itself away — so this is the part where the process is worth paying for.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The scoop bolts into the factory hood opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276472787188,"sku":"FRL-TRXAIHS","price":649.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590391540,"sku":"FRL-TRXAIHS-MTE","price":724.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590457076,"sku":"FRL-TRXAIHS-RED","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590489844,"sku":"FRL-TRXAIHS-BLU","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590424308,"sku":"FRL-TRXAIHS-FRG","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxintake.jpg?v=1788556274"},{"product_id":"ram-trx-rho-carbon-fiber-fender-vents","title":"2021-2027 RAM 1500 Carbon Fiber Fender Vents (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO's fenders are already flared and aggressive — these finish the job. Feral Auto's OEM+ carbon replacements for the factory fender vents, sold as a matched pair so both sides get the same look.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They carry the same vented, scooped language as the rest of the truck's body lines in real dry carbon, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and moisture at fender height. One part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eFender height is where the truck throws everything it picks up. Road spray, grit, and salt hit these panels from below at speed, and moisture sitting against a laminate with trapped air in it is how a carbon part starts to lift at the edges. A consolidated pre-preg panel under a UV-inhibited clear coat simply does not give it a way in. Both vents are finished and packaged together so the pair matches.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The vents fit the factory fender vent openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276474753268,"sku":"FRL-TRXFV","price":749.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590620916,"sku":"FRL-TRXFV-MTE","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590686452,"sku":"FRL-TRXFV-RED","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590719220,"sku":"FRL-TRXFV-BLU","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590653684,"sku":"FRL-TRXFV-FRG","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxfendervents2.jpg?v=1788556322"},{"product_id":"ram-trx-rho-carbon-fiber-hood-vents","title":"2021-2027 RAM 1500 Carbon Fiber Hood Vents (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO's hood is already the most aggressive panel on the truck — these make it unmistakable from every angle. Feral Auto's OEM+ carbon replacements for the factory hood vents, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They give the hood's most visible feature a show-quality finish while keeping the factory silhouette intact, finished with a polished automotive-grade clear coat with UV inhibitors that handles constant, direct sun. The design accommodates the OE \"6.2L Supercharged\" hood emblem, so you keep that factory detail (emblem not included), and one part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eThese are the largest carbon panels on the front of the truck, and scale is unforgiving. A weave that drifts a couple of degrees across a small trim piece disappears; across a hood vent at eye level it is the only thing you see. Autoclave pressure is what holds a weave flat and true over an area this size, on both panels, every time.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The vents fit the factory hood vent openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276478095604,"sku":"FRL-TRXHV","price":1199.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590850292,"sku":"FRL-TRXHV-MTE","price":1274.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590915828,"sku":"FRL-TRXHV-RED","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590948596,"sku":"FRL-TRXHV-BLU","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590883060,"sku":"FRL-TRXHV-FRG","price":1449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxhoodvents.jpg?v=1788556363"},{"product_id":"ram-1500-trx-carbon-fiber-exterior-kit","title":"2021-2027 RAM 1500 Carbon Fiber Exterior Kit (TRX, TRX SRT)","description":"\u003cp\u003eThe TRX put a supercharged 6.2L Hemi in a half-ton truck and built the rest of the truck around it — wide fenders, a scooped hood, and a front end designed to move air over that blower. The panels covering all of it are still painted plastic. This kit replaces the eight most visible ones at once.\u003c\/p\u003e\n\u003cp\u003eEvery piece is an OEM+ direct replacement built from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, engineered around your factory mounting points and installed with your existing hardware.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents-pair\"\u003eHood Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXHV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-fender-vents-pair\"\u003eFender Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXFV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-air-intake-hood-scoop\"\u003eAir Intake Hood Scoop\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXAIHS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-tail-light-surrounds-pair\"\u003eTaillight Surrounds\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXTS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-carbon-fiber-headlight-surrounds-oe-style-pair\"\u003eHeadlight Surrounds\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXHS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-carbon-fiber-engine-cover-2021-2024-oe-style\"\u003eEngine Cover\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-upper-trim-oe-style\"\u003eFront Grille Upper Trim\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXFGU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-carbon-fiber-grille-lower-trim-oe-style\"\u003eFront Grille Lower Trim\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXFGL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface.\u003c\/p\u003e\n\u003cp\u003eOn a full kit there is a second reason it matters. Order these eight parts one at a time over a year and you are taking eight separate production runs, with whatever drift that brings in weave angle and gloss. Ordered together they are built and finished together — so the carbon on your hood, your fenders, your grille, and your tailgate reads as one continuous material across the whole truck instead of eight parts that nearly match.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eEvery panel in this kit is a direct replacement, not a modification. All eight mount to the factory points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49302965715188,"sku":"FRL-TRXUCRB","price":6399.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$500)","offer_id":49302965747956,"sku":"FRL-TRXUCRB-MTE","price":6899.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$900)","offer_id":49302965780724,"sku":"FRL-TRXUCRB-RED","price":7299.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$900)","offer_id":49302965813492,"sku":"FRL-TRXUCRB-BLU","price":7299.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$1,500)","offer_id":49302965846260,"sku":"FRL-TRXUCRB-FRG","price":7899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2021-2027-Ram-TRX-Ultimate-Carbon-Fiber-Replacement-Bundle-Kit-Contents.jpg?v=1788574111"}],"url":"https:\/\/feralauto.com\/collections\/ram-1500-trx-srt.oembed","provider":"Feral Auto","version":"1.0","type":"link"}