{"title":"RAM 1500 RHO Carbon Fiber Parts","description":"\u003cp\u003e\u003cstrong\u003eCarbon Fiber Parts for the RAM 1500 RHO\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBuilt for RHO owners running the twin-turbo Hurricane inline-six — a different engine than the TRX, but a similar wide-body stance, which is why several of these parts share fitment across both trucks.\u003c\/p\u003e\n\u003cp\u003eWhat's inside: \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents-pair\"\u003ehood vents\u003c\/a\u003e, \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-fender-vents-pair\"\u003efender vents\u003c\/a\u003e, an \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-air-intake-hood-scoop\"\u003eair intake hood scoop\u003c\/a\u003e, and \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-tail-light-surrounds-pair\"\u003etail light surrounds\u003c\/a\u003e — the four panels that carry across the TRX and RHO — plus the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eCarbon Fiber Exterior Kit\u003c\/a\u003e if you want all four in one order instead of buying them separately.\u003c\/p\u003e\n\u003cp\u003eBefore you buy, check the finish (gloss, matte, red, blue, or forged — each variant page lists exact pricing for the upgrade), and confirm your year against the fitment notes on each listing. Every part here mounts to the factory attachment points using your existing hardware — nothing to drill, nothing to cut, nothing permanent.\u003c\/p\u003e\n\u003cp\u003eThese four panels carry a single part number across the TRX and RHO because the factory openings and mounting points genuinely match — not because a part was stretched to fit a second truck. Every piece is cured under heat and pressure in an autoclave from pre-preg dry carbon fiber.\u003c\/p\u003e\n\u003cp\u003eStart with the \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents-pair\"\u003eHood Vents\u003c\/a\u003e and \u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-fender-vents-pair\"\u003eFender Vents\u003c\/a\u003e if you're buying individually, or take all four at once with the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eCarbon Fiber Exterior Kit\u003c\/a\u003e. Running a TRX instead? See the \u003ca href=\"\/collections\/ram-1500-trx\"\u003eRAM 1500 TRX collection\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"ram-trx-rho-carbon-fiber-tail-light-surrounds","title":"2021-2027 RAM 1500 Carbon Fiber Tail Light Surrounds (TRX, RHO, TRX SRT)","description":"\u003cp\u003eA carbon front end deserves a rear end that matches it. These are Feral Auto's OEM+ carbon replacements for the factory tail light surrounds on the TRX and RHO, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They give the back of the truck the same built-not-bought presence you have already put up front, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun and weather at the rear of the truck.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eThe tailgate end of a truck takes a particular kind of abuse — road spray thrown up off the rear tires, standing water, and whatever the bed is carrying. A consolidated laminate with no trapped air gives moisture nowhere to work its way in behind the clear coat. Both surrounds are finished and packaged together so weave alignment and gloss match side to side.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The surrounds sit into the factory tail light openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276470165748,"sku":"FRL-TRXTS","price":849.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590063860,"sku":"FRL-TRXTS-MTE","price":924.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590129396,"sku":"FRL-TRXTS-RED","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590162164,"sku":"FRL-TRXTS-BLU","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590096628,"sku":"FRL-TRXTS-FRG","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/taillightsurrounds2.jpg?v=1788556222"},{"product_id":"ram-trx-rho-carbon-fiber-air-intake-hood-scoop","title":"2021-2027 RAM 1500 Carbon Fiber Air Intake Hood Scoop (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO already look aggressive from the factory — a carbon fiber hood scoop makes it unmistakable. This is Feral Auto's OEM+ carbon replacement for the factory scoop.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, it is a direct OEM replacement for the factory part: same hood opening, same scoop cutout, same mounting points and hardware. It gives the most visible feature on the hood a show-quality finish without changing the aggressive factory silhouette, finished with a polished automotive-grade clear coat with UV inhibitors built for constant, direct sun. One part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eNothing on this truck sees more direct sun than the top of the hood. It sits flat to the sky all day, every day, and it is also the panel an owner looks at most. That combination is exactly where a poorly consolidated laminate gives itself away — so this is the part where the process is worth paying for.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The scoop bolts into the factory hood opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276472787188,"sku":"FRL-TRXAIHS","price":649.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590391540,"sku":"FRL-TRXAIHS-MTE","price":724.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590457076,"sku":"FRL-TRXAIHS-RED","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590489844,"sku":"FRL-TRXAIHS-BLU","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590424308,"sku":"FRL-TRXAIHS-FRG","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxintake.jpg?v=1788556274"},{"product_id":"ram-trx-rho-carbon-fiber-fender-vents","title":"2021-2027 RAM 1500 Carbon Fiber Fender Vents (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO's fenders are already flared and aggressive — these finish the job. Feral Auto's OEM+ carbon replacements for the factory fender vents, sold as a matched pair so both sides get the same look.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They carry the same vented, scooped language as the rest of the truck's body lines in real dry carbon, finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and moisture at fender height. One part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eFender height is where the truck throws everything it picks up. Road spray, grit, and salt hit these panels from below at speed, and moisture sitting against a laminate with trapped air in it is how a carbon part starts to lift at the edges. A consolidated pre-preg panel under a UV-inhibited clear coat simply does not give it a way in. Both vents are finished and packaged together so the pair matches.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The vents fit the factory fender vent openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276474753268,"sku":"FRL-TRXFV","price":749.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590620916,"sku":"FRL-TRXFV-MTE","price":824.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590686452,"sku":"FRL-TRXFV-RED","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590719220,"sku":"FRL-TRXFV-BLU","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590653684,"sku":"FRL-TRXFV-FRG","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxfendervents2.jpg?v=1788556322"},{"product_id":"ram-trx-rho-carbon-fiber-hood-vents","title":"2021-2027 RAM 1500 Carbon Fiber Hood Vents (TRX, RHO, TRX SRT)","description":"\u003cp\u003eThe TRX and RHO's hood is already the most aggressive panel on the truck — these make it unmistakable from every angle. Feral Auto's OEM+ carbon replacements for the factory hood vents, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. They give the hood's most visible feature a show-quality finish while keeping the factory silhouette intact, finished with a polished automotive-grade clear coat with UV inhibitors that handles constant, direct sun. The design accommodates the OE \"6.2L Supercharged\" hood emblem, so you keep that factory detail (emblem not included), and one part number covers both the TRX and the RHO.\u003c\/p\u003e\n\u003cp\u003eIncluded in both the \u003ca href=\"\/products\/ram-1500-trx-carbon-fiber-exterior-kit\"\u003eTRX Exterior Kit\u003c\/a\u003e and the \u003ca href=\"\/products\/ram-1500-rho-carbon-fiber-exterior-kit\"\u003eRHO Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eThese are the largest carbon panels on the front of the truck, and scale is unforgiving. A weave that drifts a couple of degrees across a small trim piece disappears; across a hood vent at eye level it is the only thing you see. Autoclave pressure is what holds a weave flat and true over an area this size, on both panels, every time.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The vents fit the factory hood vent openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 TRX \u0026amp; RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2024 RAM 1500 TRX\u003cbr\u003e2025-2026 RAM 1500 RHO\u003cbr\u003e2027+ RAM 1500 TRX SRT\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276478095604,"sku":"FRL-TRXHV","price":1199.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49276590850292,"sku":"FRL-TRXHV-MTE","price":1274.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49276590915828,"sku":"FRL-TRXHV-RED","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49276590948596,"sku":"FRL-TRXHV-BLU","price":1349.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49276590883060,"sku":"FRL-TRXHV-FRG","price":1449.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/trxhoodvents.jpg?v=1788556363"},{"product_id":"ram-1500-rho-carbon-fiber-exterior-kit","title":"2025-2026 RAM 1500 Carbon Fiber Exterior Kit (RHO)","description":"\u003cp\u003eThe RAM 1500 RHO brought a twin-turbo inline-six to Ram's high-performance truck lineup, trading the TRX's supercharged Hemi for a smaller, lighter engine without losing any of the attitude. The hood, fender, and taillight panels are still painted plastic. This kit replaces four of the most visible ones in one order.\u003c\/p\u003e\n\u003cp\u003eEvery piece is an OEM+ direct replacement built from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, engineered around your factory mounting points and installed with your existing hardware.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-hood-vents-pair\"\u003eHood Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXHV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-fender-vents-pair\"\u003eFender Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXFV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-air-intake-hood-scoop\"\u003eAir Intake Hood Scoop\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXAIHS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/ram-trx-rho-carbon-fiber-tail-light-surrounds-pair\"\u003eTaillight Surrounds\u003c\/a\u003e\u003c\/strong\u003e — FRL-TRXTS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface.\u003c\/p\u003e\n\u003cp\u003eOn a full kit there is a second reason it matters. Order these four parts one at a time and you are taking four separate production runs, with whatever drift that brings in weave angle and gloss. Ordered together they are built and finished together — so the carbon on your hood, your fenders, and your tailgate reads as one continuous material instead of four parts that nearly match.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eEvery panel in this kit is a direct replacement, not a modification. All four mount to the factory points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eRAM 1500 RHO Fitment\u003c\/h2\u003e\n\u003cp\u003e2025-2026 RAM 1500 RHO\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49302957228276,"sku":"FRL-RHOCRB","price":2999.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$250)","offer_id":49302957261044,"sku":"FRL-RHOCRB-MTE","price":3249.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$500)","offer_id":49302957293812,"sku":"FRL-RHOCRB-RED","price":3499.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$500)","offer_id":49302957326580,"sku":"FRL-RHOCRB-BLU","price":3499.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$800)","offer_id":49302957359348,"sku":"FRL-RHOCRB-FRG","price":3799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2025-2026-Ram-RHO-Carbon-Fiber-Replacement-Bundle-Kit-Contents.jpg?v=1788573896"}],"url":"https:\/\/feralauto.com\/collections\/ram-1500-rho.oembed","provider":"Feral Auto","version":"1.0","type":"link"}