{"title":"Ford F-150 Carbon Fiber Parts","description":"\u003cp\u003e\u003cstrong\u003eCarbon Fiber Parts for the Ford F-150 Raptor and Raptor R\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEverything in this collection is autoclaved pre-preg dry carbon fiber, molded off the third-generation F-150's own panels and mounted on the factory attachment points. Nothing here is a generic truck part trimmed to fit.\u003c\/p\u003e\n\u003cp\u003eWhat's inside: \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-fender-vents\"\u003efender vents\u003c\/a\u003e that fit both the Raptor and the Raptor R, the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-hood-vent-trim\"\u003eRaptor hood vent and trim\u003c\/a\u003e, and the \u003ca href=\"\/products\/2023-2027-ford-f-150-raptor-r-carbon-fiber-hood-vent-trim\"\u003eRaptor R hood vent and trim\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich hood vent is yours.\u003c\/strong\u003e The Raptor and the Raptor R do not share a hood. The 450-horsepower 3.5L EcoBoost Raptor runs one hood vent; the supercharged 5.2L Raptor R runs a different one. Each has its own listing and they are not interchangeable, so check your truck before you order. The fender vents are the exception — one set covers both.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinishes.\u003c\/strong\u003e Gloss is standard. Matte, Red, Blue, and Forged Carbon are available on every part, with exact upgrade pricing shown on each listing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation.\u003c\/strong\u003e Every part here mounts to the factory attachment points using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included because none is required.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShopping one truck in particular? See the \u003ca href=\"\/collections\/ford-f-150-raptor\"\u003eFord F-150 Raptor collection\u003c\/a\u003e or the \u003ca href=\"\/collections\/ford-f-150-raptor-r\"\u003eFord F-150 Raptor R collection\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","products":[{"product_id":"2021-2027-ford-f-150-raptor-carbon-fiber-fender-vents","title":"2021-2027 Ford F-150 Carbon Fiber Fender Vents (Raptor, Raptor R)","description":"\u003cp\u003eThe F-150 Raptor and Raptor R are built around a stance nothing else in the half-ton segment has — wide fenders, long-travel suspension, and bodywork shaped for desert speed. The fender vents sitting in the middle of all that are still painted plastic. These are Feral Auto's OEM+ carbon replacements for them, sold as a matched pair.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, they are direct OEM replacements for the factory panels: same openings, same mounting points, same hardware. Finished with a polished automotive-grade clear coat with UV inhibitors that holds up to sun, road debris, and whatever the front tires throw at fender height. One part number covers both the Raptor and the Raptor R.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-hood-vent-trim\"\u003eRaptor Hood Vent \u0026amp; Trim\u003c\/a\u003e, or the \u003ca href=\"\/products\/2023-2027-ford-f-150-raptor-r-carbon-fiber-hood-vent-trim\"\u003eRaptor R Hood Vent \u0026amp; Trim\u003c\/a\u003e if you're running the R.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eFender height on a Raptor is the hardest place on the truck to put a panel. It sits directly in the spray off a 35-inch tire, taking grit, salt and standing water from below at speed. Moisture working into a laminate with trapped air in it is how a carbon part starts lifting at the edges — a consolidated pre-preg panel under a UV-inhibited clear coat does not give it the opening. Both vents are finished and packaged together so the pair matches.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. The vents fit the factory fender vent openings on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eFord F-150 Raptor \u0026amp; Raptor R Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2027 Ford F-150 Raptor\u003cbr\u003e2023-2027 Ford F-150 Raptor R\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49277915988212,"sku":"FRL-RPTRFV","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49277916020980,"sku":"FRL-RPTRFV-MTE","price":1074.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49277916086516,"sku":"FRL-RPTRFV-RED","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49277916119284,"sku":"FRL-RPTRFV-BLU","price":1149.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49277916053748,"sku":"FRL-RPTRFV-FRG","price":1249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/FENDERVENT.jpg?v=1789178725"},{"product_id":"2021-2027-ford-f-150-raptor-carbon-fiber-hood-vent-trim","title":"2021-2027 Ford F-150 Carbon Fiber Hood Vent \u0026 Trim (Raptor)","description":"\u003cp\u003eThe Raptor's hood tells you what the truck is before you see anything else — and the vent in the middle of it leaves the factory as painted plastic. This is Feral Auto's OEM+ carbon replacement for it.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, this hood vent and trim is a direct OEM replacement for the factory panel: same opening, same mounting points, same hardware. It gives the most visible panel on the truck a show-quality finish without altering the factory silhouette, finished with a polished automotive-grade clear coat with UV inhibitors built for constant, direct sun.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-fender-vents\"\u003eCarbon Fiber Fender Vents\u003c\/a\u003e to carry the hood treatment into the flares.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRunning a Raptor R?\u003c\/strong\u003e The R uses a different three-piece vent arrangement — see the \u003ca href=\"\/products\/2023-2027-ford-f-150-raptor-r-carbon-fiber-hood-vent-trim\"\u003eRaptor R Hood Vent \u0026amp; Trim\u003c\/a\u003e instead. This part will not fit it.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eNothing on this truck sees more direct sun than the top of the hood, and nothing gets looked at more closely. It sits flat to the sky all day, and it is the first panel anyone walks up to. That combination is exactly where a poorly consolidated laminate gives itself away — so this is the part where the process is worth paying for.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vent fits the factory hood opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eFord F-150 Raptor Fitment\u003c\/h2\u003e\n\u003cp\u003e2021-2027 Ford F-150 Raptor\u003cbr\u003e\u003cem\u003eDoes not fit the Raptor R — see the Raptor R Hood Vent \u0026amp; Trim.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49277925523700,"sku":"FRL-RPTRHVT","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49277925556468,"sku":"FRL-RPTRHVT-MTE","price":1474.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49277925622004,"sku":"FRL-RPTRHVT-RED","price":1549.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49277925654772,"sku":"FRL-RPTRHVT-BLU","price":1549.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49277925589236,"sku":"FRL-RPTRHVT-FRG","price":1649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/21-24HOODVENT_TRIM.jpg?v=1789178708"},{"product_id":"2023-2027-ford-f-150-raptor-r-carbon-fiber-hood-vent-trim","title":"2023-2027 Ford F-150 Carbon Fiber Hood Vent \u0026 Trim (Raptor R)","description":"\u003cp\u003eThe Raptor R is Ford's most extreme half-ton — a supercharged 5.2L V8 under the widest body Ford puts on an F-150. Its hood vent is a different, three-piece arrangement from the standard Raptor's, and all three pieces leave the factory as painted plastic. This is Feral Auto's OEM+ carbon replacement for the complete set.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, these three panels are direct OEM replacements for the factory pieces: same hood opening, same mounting points, same hardware. Finished with a polished automotive-grade clear coat with UV inhibitors built for constant, direct sun, and produced together in one run so all three pieces match across the hood.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-fender-vents\"\u003eCarbon Fiber Fender Vents\u003c\/a\u003e, which fit the Raptor R as well.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Wet layup and vacuum infusion add resin at the mold, and the result varies with whoever laid it.\u003c\/p\u003e\n\u003cp\u003eA three-piece set raises the stakes on consistency. Three separate panels sitting inches apart on the most looked-at surface of the truck will show any drift in weave angle or gloss level immediately. Autoclave curing produces a repeatable result piece to piece, and all three are finished and packaged together so the set leaves as a set.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cp\u003eThese are direct replacements, not modifications. All three pieces fit the factory hood opening on your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eWe recommend professional installation. Minor adjustments during fitment are a normal part of installing any carbon fiber body component and are not an indication of a defect. Carbon fiber parts are finished by hand, so slight variations in weave alignment and clear coat between individual pieces are normal.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e65-75 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e\n\u003ch2\u003eFord F-150 Raptor R Fitment\u003c\/h2\u003e\n\u003cp\u003e2023-2027 Ford F-150 Raptor R\u003cbr\u003e\u003cem\u003eRunning a standard Raptor? See the \u003ca href=\"\/products\/2021-2027-ford-f-150-raptor-carbon-fiber-hood-vent-trim\"\u003eRaptor Hood Vent \u0026amp; Trim\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49331362103540,"sku":"FRL-RPTRHVTR","price":1699.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49331362136308,"sku":"FRL-RPTRHVTR-MTE","price":1774.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$150)","offer_id":49331362234612,"sku":"FRL-RPTRHVTR-RED","price":1849.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$150)","offer_id":49331362267380,"sku":"FRL-RPTRHVTR-BLU","price":1849.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":49331362169076,"sku":"FRL-RPTRHVTR-FRG","price":1949.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/23-26HOODVENT_TRIM.jpg?v=1789178680"}],"url":"https:\/\/feralauto.com\/collections\/ford-f-150.oembed","provider":"Feral Auto","version":"1.0","type":"link"}