{"title":"Corvette C8 Z06","description":"\u003cp\u003eThe Z06 is the naturally aspirated, high-revving track branch of the C8 lineup — a car built for buyers who want the sharpest response and least complexity, not the hybrid all-wheel drive of the E-Ray or the broader daily-use focus of the Stingray.\u003c\/p\u003e\n\u003cp\u003eMost of the aero and trim parts here are shared across the wide-body cars, since Z06, E-Ray, and Grand Sport all wear the same fenders and body lines. What is specific to this car is the rear diffuser, which is cut for the Z06's own rear-end geometry and exhaust and does not carry over to the E-Ray, and the two full exterior kits built around the Coupe and the Convertible.\u003c\/p\u003e\n\u003cp\u003eCoupe and Convertible take different hatch vents and kits, so confirm your body style before ordering. Every listing here states its exact trim fitment rather than leaving you to assume that everything wide-body fits everything wide-body.\u003c\/p\u003e","products":[{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Front Spoiler (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8 Z06, E-Ray and Grand Sport look like supercars from every angle. The factory front spoiler underneath is still painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The front spoiler mounts to the factory locations on your front fascia using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, shaped to the Z06, E-Ray and Grand Sport bumper line.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eFits the Z06, E-Ray and Grand Sport — Not the Stingray\u003c\/h2\u003e\n\u003cp\u003eThis is the one fitment question worth getting right before you order. Those three trims share a wider front fascia than the Stingray, and this spoiler is cut for it. It will not sit correctly on a Stingray, and the Stingray's own front spoiler is not interchangeable in the other direction either.\u003c\/p\u003e\n\u003cp\u003eIf you are cross-shopping, the giveaway is the body itself rather than the badge: the Z06, E-Ray and Grand Sport are visibly broader across the front wheel arches. The three trims that take this part are named in the title, and every Feral Auto listing states its exact trims for the same reason.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e and a rear diffuser cut for your exhaust layout — the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06\"\u003ecenter-exit\u003c\/a\u003e piece on a Z06, the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003ecorner-exit\u003c\/a\u003e one on an E-Ray. It is a standard part in the Z06, E-Ray and Grand Sport Exterior Kits, and \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-z07-dive-planes-z06-e-ray-grand-sport\"\u003eZ07 Dive Planes\u003c\/a\u003e sharpen the front corners further.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for the rest of what suits your car.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA front spoiler is the lowest and most exposed part on the car. It meets driveway lips, parking blocks and road debris before anything else does, so rigidity and edge quality matter more here than anywhere else on the Corvette.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019041845492,"sku":"FRL-C8ZFS","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/Feral_2023-Chevrolet-Corvette-C8-Carbon-Fiber-Front-Spoiler-_Z06__1.jpg?v=1776718233"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Rear Low Wing with Wicker Bill Extension Winglets (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eOn the Z06, E-Ray and Grand Sport the rear deck is where the car makes its statement, and the low wing is the piece that sets the tone for everything behind the doors.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The wing mounts to the factory rear deck locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and supplied with the wicker bill extension winglets fitted.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eCheaper Inside a Kit\u003c\/h2\u003e\n\u003cp\u003eThis wing is not part of any Exterior Kit as standard, but every one of them offers it as an optional add-on — and it costs less added there than bought on this page. All six kits carry it: \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06\"\u003eZ06 Coupe\u003c\/a\u003e, \u003ca href=\"\/products\/2023-2026-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06-htc\"\u003eZ06 Convertible\u003c\/a\u003e, \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-e-ray\"\u003eE-Ray Coupe\u003c\/a\u003e, \u003ca href=\"\/products\/2024-chevrolet-corvette-c8-carbon-fiber-exterior-kit-e-ray-htc\"\u003eE-Ray Convertible\u003c\/a\u003e, \u003ca href=\"\/products\/2027-chevrolet-corvette-c8-carbon-fiber-exterior-kit-grand-sport-coupe\"\u003eGrand Sport Coupe\u003c\/a\u003e and \u003ca href=\"\/products\/2027-chevrolet-corvette-c8-carbon-fiber-exterior-kit-grand-sport-htc\"\u003eGrand Sport Convertible\u003c\/a\u003e. Buy it here if you are not building a kit, or if your kit is already ordered.\u003c\/p\u003e\n\u003cp\u003eFinishes the rear alongside the rear diffuser cut for your exhaust — the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06\"\u003ecenter-exit piece\u003c\/a\u003e on a Z06, the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003ecorner-exit one\u003c\/a\u003e on an E-Ray, and either on a Grand Sport depending on its exhaust — which the kits include as standard. The winglets are also sold \u003ca href=\"\/products\/2023-2024-chevrolet-corvette-c8-carbon-fiber-wicker-bill-extension-winglets-z06\"\u003eon their own\u003c\/a\u003e if your wing is already carbon.\u003c\/p\u003e\n\u003cp\u003eEach trim keeps its own parts list: the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eCorvette C8 Z06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eCorvette C8 E-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eCorvette C8 Grand Sport\u003c\/a\u003e collections show everything that fits alongside this wing.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA wing is a long span carried on two stanchions, which makes it the part where a soft laminate shows up as visible flex at speed. The wicker bill edge is also one of the sharpest details on the car, and sharp edges are where hand-laid parts round off.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019042009332,"sku":"FRL-C8ZRLW","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/Feral_2023-Chevrolet-Corvette-C8-Carbon-Fiber-Rear-Low-Wing-with-Wicker-Bill-Extension-Winglets-_Z06__1.jpg?v=1776718234"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Side Skirts (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8 Z06, E-Ray and Grand Sport have the longest uninterrupted flanks in the range, and from the factory the rockers under them are painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The skirts mount to the factory rocker locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and sold as a pair, driver and passenger side, finished together so the weave and gloss match left to right.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eWhy the Pair Is Finished Together\u003c\/h2\u003e\n\u003cp\u003eSide skirts are the one part on the car where both halves are almost never seen at the same time — and that is exactly why they have to match. Nobody photographs both flanks at once, but they do walk from one side to the other, and a gloss level or weave direction that shifts between them is the kind of thing you notice once and then cannot stop noticing.\u003c\/p\u003e\n\u003cp\u003eCuring both skirts in the same run is what prevents it. Ordered separately, or ordered months apart, two parts from different runs can differ enough in sheen to read as mismatched in direct sun even when each one is faultless on its own.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e and \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06\"\u003eCarbon Fiber Quarter Panel Side Scoops\u003c\/a\u003e to carry the same weave down the side. It is a standard part in the Z06, E-Ray and Grand Sport Exterior Kits, where the whole set is finished in one run for the same reason.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA side skirt is a long, shallow part with very little depth to stiffen it. That is exactly the shape that sags and chatters when the laminate is inconsistent, and it is the part people see from three feet away at every car meet.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019042140404,"sku":"FRL-C8ZSS","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/Feral_2023-Chevrolet-Corvette-C8-Carbon-Fiber-Side-Skirts-_Z06__1.jpg?v=1776718243"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Exterior Kit (Z06) - Coupe","description":"\u003cp\u003eThe Z06 gets a rear end the rest of the C8 line does not. Its exhaust exits through the center, so the diffuser has to be cut around it — which is why this kit carries the Z06 diffuser rather than the corner-exit piece the Stingray and E-Ray share. Nine pieces, nose to tail, in one order. Prefer to build in stages? Every piece is also sold on its own.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06 Coupe only. Does not fit Convertible models — the engine hatch vents, lower engine hatch trim and rear camera cover are Coupe-only parts.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06\"\u003eFront Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06\"\u003eSide Skirts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06\"\u003eRear Diffuser\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZRD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-grille-inserts-z06\"\u003eFront Grille Inserts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZFGI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06\"\u003eQuarter Panel Door Handle \/ Side Scoops\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZQPSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eEngine Hatch Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8EHV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eLower Engine Hatch Trim\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8LEHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eMirror Caps\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eRear Camera Cover\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8RCC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrdered as a kit, these cost about $1,300 less than buying them one at a time in Standard Gloss, and every finish upgrade costs less inside the kit than outside it.\u003c\/p\u003e\n\u003ch2\u003eTwo Optional Add-Ons\u003c\/h2\u003e\n\u003cp\u003eBoth default to \u003cstrong\u003eNo\u003c\/strong\u003e — the kit above is complete on its own. Add either, or both, at the top of this page and the price updates for the finish you have chosen:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06\"\u003eRear Low Wing w\/ Winglets\u003c\/a\u003e\u003c\/strong\u003e — the carbon replacement for your factory low spoiler, supplied with the wicker bill winglets already fitted. Cheaper inside the kit than bought on its own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-z07-dive-planes-z06-e-ray-grand-sport\"\u003eZ07 Dive Planes\u003c\/a\u003e\u003c\/strong\u003e — canards for the front corners. Worth adding if you already run a high wing, or if you want the Z07 look without changing the wing at all. Also cheaper inside the kit. \u003cem\u003eDesigned around the factory Z07 mounting points, so a standard front bumper may need modification.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat Makes This the Z06 Kit\u003c\/h2\u003e\n\u003cp\u003eEight of these nine pieces are the same as the E-Ray kit. The ninth is the diffuser, and it is the whole reason the two are not interchangeable: FRL-C8ZRD is cut for the center-exit exhaust layout and will not sit on a corner-exit car. If you are comparing the two kits, that single part is the entire difference.\u003c\/p\u003e\n\u003cp\u003eDriving a Convertible? The \u003ca href=\"\/products\/2023-2026-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06-htc\"\u003eZ06 Convertible kit\u003c\/a\u003e swaps the coupe-only parts for their Convertible equivalents. Every part sold for this trim sits in the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eCorvette C8 Z06\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch2\u003eWhy Dry Carbon, and Where It Shows on This Kit\u003c\/h2\u003e\n\u003cp\u003eDry carbon begins with pre-preg cloth, which arrives with the resin already worked through the weave at a fixed ratio. Nothing is brushed on at the bench. The stack then cures under heat and pressure in an autoclave, pressing the plies together and driving out the trapped air that later surfaces as pinholes or cloudy patches. Wet processes introduce the resin at the mold instead, so the ratio is set by hand, part by part.\u003c\/p\u003e\n\u003cp\u003eOn this kit it shows first at the back. The center-exit diffuser sits in the exhaust stream rather than beside it, and a laminate carrying voids discolors around a hot cutout. Every one of these nine pieces is cured the same way, in the finish you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed. The finish you choose applies to every piece in the kit, including any add-on.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019042205940,"sku":"FRL-C8ZCEBCPE","price":8499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/bundle_coupe_full-kit_2048.jpg?v=1789619603"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-grille-inserts-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Front Grille Inserts (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8 Z06, E-Ray and Grand Sport already wear an aggressive front grille from the factory. Carbon inserts are the simplest way to make it read as intentional rather than standard.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The inserts mount to the factory grille locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e, cut to those three trims' own grille openings.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eThe Simplest Real Change to the Front End\u003c\/h2\u003e\n\u003cp\u003eOf everything Feral Auto makes for the front of these cars, this is the simplest part that still changes the face rather than just adding a detail. The grille openings sit at the center of the front end, dead ahead at eye level, and the factory pieces in them are flat painted plastic. Swapping them is the shortest distance between stock and deliberate.\u003c\/p\u003e\n\u003cp\u003eIt is also the easiest to reverse. These mount to the factory locations with the factory hardware, so if you sell the car you can put the originals back in an afternoon and take the carbon with you.\u003c\/p\u003e\n\u003cp\u003eWorks with the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e below it to finish the front end, and is a standard part in the Z06, E-Ray and Grand Sport Exterior Kits. For the Z07 look at the outer corners, add \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-z07-dive-planes-z06-e-ray-grand-sport\"\u003eZ07 Dive Planes\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for everything else that fits your car.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA grille insert sits directly in the path of everything the front of the car hits — stone chips, bugs, road salt. The weave here is the finish itself rather than a color layer over something else, so a scuff does not expose a different material underneath.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019043156212,"sku":"FRL-C8ZFGI","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2023-2024-Chevrolet-Corvette-C8-Carbon-Fiber-Grille-Inserts_3_23dda552-57aa-47f0-9c32-0a6b9bfc5dd9.jpg?v=1776718283"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Quarter Panel Door Handle\/Side Scoop (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8's quarter panel door handle doubles as the side scoop feeding the engine — one of the most distinctive details on the Z06, E-Ray, and Grand Sport, and one of the few places carbon reads as functional rather than decorative.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The scoops mount to the factory quarter panel locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and sold as a pair, driver and passenger side, finished together so the weave matches across the car.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eA Handle That Is Also an Intake\u003c\/h2\u003e\n\u003cp\u003eOn a mid-engine car the air has to get in behind the cabin, and on the C8 that duct runs straight through the piece you grab to open the door. It is the rare exterior part that is doing two jobs at once, which is why replacing it in carbon reads differently from a trim panel — the shape was always functional, the material just catches up with it.\u003c\/p\u003e\n\u003cp\u003ePractically, that also means it is the most-touched carbon part on the car. Every time someone opens a door they put a hand on it, and it sits exactly where door edges, belt buckles and shopping bags find it in a tight parking space. A consolidated laminate with a hard, even clear coat is what keeps that from showing after a year.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e down the flanks, and is a standard part in the Z06, E-Ray and Grand Sport Exterior Kits.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThis part sits right where hands, door edges and shopping bags find it. A deep compound scoop shape is also the kind of geometry where a hand-laid part shows every inconsistency in the laminate at the transitions.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019043254516,"sku":"FRL-C8ZQPSS","price":1499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2023-2024-Chevrolet-Corvette-C8-Carbon-Fiber-Quarter-Panel-Door-Handle-Side-Scoop_1_cb16b36c-45fa-492e-a846-ef08c2ba3404.jpg?v=1776718288"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Rear Diffuser (Z06, Grand Sport)","description":"\u003cp\u003eThere are two C8 rear diffusers, and which one fits your car comes down to where the exhaust exits. This is the center-exit one.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The diffuser mounts to the factory rear bumper locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and shaped around the center-exit exhaust layout used by the Z06 and by center-exit Grand Sports.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06 and the 2027 Grand Sport with center-exit exhaust, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eWhich Diffuser Fits Your C8\u003c\/h2\u003e\n\u003cp\u003eThe cutout in a rear diffuser has to clear the exhaust, and the C8 does not run one layout across the range. Every Z06 exits through the center, so it takes this piece. Stingrays and E-Rays exit at the corners, so they take the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003estandard corner-exit diffuser\u003c\/a\u003e instead. The Grand Sport was built both ways — check your own car before choosing, because the two are not interchangeable.\u003c\/p\u003e\n\u003cp\u003eThis is the diffuser supplied as standard in the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06\"\u003eZ06 Coupe\u003c\/a\u003e and \u003ca href=\"\/products\/2023-2026-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06-htc\"\u003eZ06 Convertible\u003c\/a\u003e Exterior Kits, and in the \u003ca href=\"\/products\/2027-chevrolet-corvette-c8-carbon-fiber-exterior-kit-grand-sport-coupe\"\u003eGrand Sport Coupe\u003c\/a\u003e and \u003ca href=\"\/products\/2027-chevrolet-corvette-c8-carbon-fiber-exterior-kit-grand-sport-htc\"\u003eGrand Sport Convertible\u003c\/a\u003e kits when you select center-exit exhaust. It finishes the rear alongside the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06\"\u003eCarbon Fiber Rear Low Wing\u003c\/a\u003e, which those kits offer as an optional add-on rather than a standard part. Browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eCorvette C8 Z06\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eCorvette C8 Grand Sport\u003c\/a\u003e collections for the rest of what suits your car.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA center-exit diffuser sits directly in the exhaust stream rather than beside it, which puts the middle of the part under more sustained heat than the outer strakes ever see. A laminate that was not consolidated under pressure shows that first as discoloration around the cutout.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019043713268,"sku":"FRL-C8ZRD","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/2023-2024-Chevrolet-Corvette-C8-Carbon-Fiber-Rear-Diffuser-_Z06__1.jpg?v=1776718317"},{"product_id":"2023-2024-chevrolet-corvette-c8-carbon-fiber-wicker-bill-extension-winglets-z06","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Wicker Bill Extension Winglets (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe wicker bill is one of the smallest details on the rear wing of a Z06, E-Ray or Grand Sport, and one of the few places where a carbon upgrade changes the silhouette rather than just the surface.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The winglets mount to the factory wing locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and sold as a set, finished together so the weave matches side to side.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eDo You Actually Need This Part?\u003c\/h2\u003e\n\u003cp\u003eMost people do not, and it is worth saying so plainly. These winglets come \u003cstrong\u003ealready fitted\u003c\/strong\u003e to the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06\"\u003eCarbon Fiber Rear Low Wing\u003c\/a\u003e. If you are buying that wing — on its own or as an add-on inside an Exterior Kit — the winglets arrive with it and you do not need this listing at all.\u003c\/p\u003e\n\u003cp\u003eThis page exists for one situation: your wing is already carbon, either from the factory Z07 package or a previous purchase, and you want the wicker bill in matching carbon without replacing the whole wing. That is a real case, and buying the winglets alone is considerably cheaper than buying a second wing to get them.\u003c\/p\u003e\n\u003cp\u003eOne thing to expect if you do: these are cured in their own run, not alongside your existing wing. Carbon from separate runs can differ slightly in sheen, so a brand-new gloss winglet against a wing that has had a few seasons of sun will not always be an invisible match.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA winglet is mostly edge. The whole part is a thin blade with a sharp trailing lip, and that lip is the first thing to round off or go soft on a part that was not cured under pressure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":48019044892916,"sku":"FRL-C8ZRLWW","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/Feral_2023-Chevrolet-Corvette-C8-Carbon-Fiber-Rear-Low-Wing-with-Wicker-Bill-Extension-Winglets-_Z06__5_91fe1530-20ec-4b75-9729-230397328907.jpg?v=1776718339"},{"product_id":"c8-corvette-carbon-fiber-hatch-vent-convertible","title":"2020-2027 C8 Corvette Carbon Fiber Hatch Vent (Stingray, Z06, E-Ray, Grand Sport) - Convertible","description":"\u003cp\u003eWith the roof stowed, the hatch vent stops being a detail behind you and becomes part of what you see over your shoulder. From the factory it is painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vent replaces the factory painted trim and mounts to the factory locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look on your C8. This part sits near the engine bay and takes constant sun with the top down, so it is finished with a UV-inhibiting, high-temperature-resistant clear coat built for exactly that environment.\u003c\/p\u003e\n\u003cp\u003eFits the Convertible: 2020-2027 Chevrolet Corvette C8 Stingray, 2023-2027 Z06, 2024-2027 E-Ray and 2027 Grand Sport.\u003c\/p\u003e\n\u003ch2\u003eConvertible, Not Coupe\u003c\/h2\u003e\n\u003cp\u003eA Convertible stows its roof where a Coupe carries its engine hatch, so the two body styles do not share this area at all. The Convertible takes this single vent. A Coupe takes a matched pair of \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eEngine Hatch Vents\u003c\/a\u003e, the Lower Engine Hatch Trim and a rear camera cover, none of which fit this car. It is one part here against four back there, and nothing crosses over.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eCarbon Fiber Mirror Caps\u003c\/a\u003e. It fits every C8 trim in Convertible form, so the full \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eChevrolet Corvette C8\u003c\/a\u003e collection is the place to browse from.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eConvertible only — does not fit Coupe models.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eOn a Convertible this part spends its life fully exposed rather than shaded by a roofline, so it sees more direct UV than the same area ever does on a Coupe. Heat cycling plus sunlight is what separates a properly cured laminate from one that prints the weave through the clear coat after a season.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49276637249780,"sku":"FRL-C8HV","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8rearhatchvent.jpg?v=1789079942"},{"product_id":"c8-corvette-carbon-fiber-engine-hatch-vents-coupe","title":"2020-2027 C8 Corvette Carbon Fiber Engine Hatch Vents (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eOn a C8 Coupe the engine sits under glass, and the two vents flanking it are the frame around the best view in the car. From the factory they are painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents mount to the factory locations and reuse your factory mesh grills using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look, and sold as a matched pair, driver and passenger side. These sit directly over the engine bay and take real heat and constant sun, so they are finished with a UV-inhibiting, high-temperature-resistant clear coat built for that.\u003c\/p\u003e\n\u003cp\u003eFits the Coupe: 2020-2027 Chevrolet Corvette C8 Stingray, 2023-2027 Z06, 2024-2027 E-Ray and 2027 Grand Sport.\u003c\/p\u003e\n\u003ch2\u003eA Matched Pair, Not a Single Vent\u003c\/h2\u003e\n\u003cp\u003eThis is where the Coupe and the Convertible part company. A Coupe has an engine hatch to vent, so it takes two vents that have to agree with each other across the deck — finished together so the weave runs the same way on both sides, which is the thing you notice from behind the car. A Convertible has no hatch there at all and takes a \u003ca href=\"\/products\/c8-corvette-carbon-fiber-hatch-vent-convertible\"\u003esingle Convertible hatch vent\u003c\/a\u003e instead. The parts are not interchangeable in either direction.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e and \u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eCarbon Fiber Rear Camera Cover\u003c\/a\u003e to finish the rear deck. Fits every C8 trim in Coupe form — see the full \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eChevrolet Corvette C8\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCoupe only — does not fit Convertible models.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA pair is harder than a single part. Both pieces sit inches from the engine, inches from each other, and any difference in how the two cured shows up as a mismatch in gloss across the middle of the car. Curing them in the same run is what prevents it.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49276653338868,"sku":"FRL-C8EHV","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8decklidsidevents.jpg?v=1789079552"},{"product_id":"c8-corvette-carbon-fiber-lower-engine-hatch-trim","title":"2020-2027 C8 Corvette Carbon Fiber Lower Engine Hatch Trim (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eThe lower engine hatch trim is the piece that ties the rest of your rear deck carbon together — and from the factory it is painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The trim mounts to the factory locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look. This is a true replacement, not an overlay stuck on top of the factory piece.\u003c\/p\u003e\n\u003cp\u003eMeant to run with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e and the \u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eCarbon Fiber Rear Camera Cover\u003c\/a\u003e, so the whole rear deck reads as one surface instead of a patchwork of finishes. The rest of the C8 catalog, trim by trim, sits in the \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eCorvette C8\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003cp\u003eCoupe only — does not fit Convertible models.\u003c\/p\u003e\n\u003cp\u003eFits the Coupe: 2020-2027 Chevrolet Corvette C8 Stingray, 2023-2027 Z06, 2024-2027 E-Ray and 2027 Grand Sport.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eBecause this part sits right beside two other carbon parts, its surface is seen side by side with theirs. That is where a controlled cure, rather than a hand layup, shows.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49276670247156,"sku":"FRL-C8LEHT","price":699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8decklidlowerpanel_61ba22e9-102f-44b5-80af-3bf9ed5c8c39.jpg?v=1789079605"},{"product_id":"chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Mirror Caps (Stingray, Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8 already turns heads. The factory mirror caps are the easiest single spot on the car to level up, and the one most people leave alone.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The factory cover comes off and the carbon cap goes on in its place using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave designed to match the factory carbon look on your C8, and sold as a pair, driver and passenger side. These are true replacements for your factory covers, not stick-on overlays hiding what is underneath.\u003c\/p\u003e\n\u003cp\u003eFits every C8 trim. Pairs with the \u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eCarbon Fiber Rear Camera Cover\u003c\/a\u003e and, on the Z06, E-Ray or Grand Sport, the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06\"\u003eCarbon Fiber Quarter Panel Side Scoops\u003c\/a\u003e. Because these caps fit the whole line, they turn up in every trim's parts list — start from the \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eCorvette C8\u003c\/a\u003e collection to see what else is offered for your car.\u003c\/p\u003e\n\u003cp\u003eFits every Chevrolet Corvette C8: 2020-2027 Stingray, 2023-2027 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA mirror cap is a small, tightly curved part that people see up close, at arm's length, every time they get in the car. There is no distance to hide behind on a part like this — the weave has to lie down cleanly around the compound curve.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49288212381940,"sku":"FRL-C8MC","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8mirrorcovers.jpg?v=1789079739"},{"product_id":"2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Rear Camera Cover (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eThe rear hatch on a C8 Coupe is loaded with detail, and the rear camera cover is the one spot everybody overlooks — until they see it done in carbon.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The cover mounts to the factory clips and mounting locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave designed to match the factory carbon look. This is a true replacement, not a taped-on overlay sitting on top of the factory cover, and it includes a 3D printed camera receiver to keep your rear camera properly aligned.\u003c\/p\u003e\n\u003cp\u003eFinishes the rear deck alongside the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e and \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e. Pairs naturally with the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eCarbon Fiber Mirror Caps\u003c\/a\u003e. Those, and everything else made for the car, are grouped by trim in the \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eCorvette C8\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCoupe only — does not fit C8 Convertible models.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eFits the Coupe: 2020-2027 Chevrolet Corvette C8 Stingray, 2023-2027 Z06, 2024-2027 E-Ray and 2027 Grand Sport.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThis part has to hold a camera in precise alignment while looking like trim. Dimensional stability through the cure is the whole job here, and that is exactly what an autoclave gives you over a hand layup.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e\n","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49288213758196,"sku":"FRL-C8RCC","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8rearcameradecklid.jpg?v=1789079817"},{"product_id":"2023-2026-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06-htc","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Exterior Kit (Z06) - Convertible","description":"\u003cp\u003eSeven pieces for the center-exit Z06 with the roof out of the equation. A Convertible has no engine hatch to vent, so the coupe's hatch trio gives way to a single Convertible hatch vent and the rear camera cover drops out entirely. The Z06 diffuser stays, because the exhaust exits the same way whatever the roof is doing.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06 Convertible only. Does not fit Coupe models — the hatch vent in this kit is a Convertible-only part.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06\"\u003eFront Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-side-skirts-z06\"\u003eSide Skirts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06\"\u003eRear Diffuser\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZRD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-grille-inserts-z06\"\u003eFront Grille Inserts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZFGI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06\"\u003eQuarter Panel Door Handle \/ Side Scoops\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8ZQPSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-hatch-vent-convertible\"\u003eHatch Vent\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8HV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eMirror Caps\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8MC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrdered as a kit, these cost about $1,200 less than buying them one at a time in Standard Gloss, and every finish upgrade costs less inside the kit than outside it.\u003c\/p\u003e\n\u003ch2\u003eTwo Optional Add-Ons\u003c\/h2\u003e\n\u003cp\u003eBoth default to \u003cstrong\u003eNo\u003c\/strong\u003e — the kit above is complete on its own. Add either, or both, at the top of this page and the price updates for the finish you have chosen:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06\"\u003eRear Low Wing w\/ Winglets\u003c\/a\u003e\u003c\/strong\u003e — the carbon replacement for your factory low spoiler, supplied with the wicker bill winglets already fitted. Cheaper inside the kit than bought on its own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-z07-dive-planes-z06-e-ray-grand-sport\"\u003eZ07 Dive Planes\u003c\/a\u003e\u003c\/strong\u003e — canards for the front corners. Worth adding if you already run a high wing, or if you want the Z07 look without changing the wing at all. Also cheaper inside the kit. \u003cem\u003eDesigned around the factory Z07 mounting points, so a standard front bumper may need modification.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCoupe or Convertible\u003c\/h2\u003e\n\u003cp\u003eThis kit is seven pieces to the Coupe's nine, and every difference sits behind the cabin. The Coupe gets Engine Hatch Vents, Lower Engine Hatch Trim and a Rear Camera Cover across the deck; the Convertible replaces all three with one Convertible-specific hatch vent. Everything else is identical between the two, diffuser included.\u003c\/p\u003e\n\u003cp\u003eDriving a Coupe? The \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-exterior-kit-z06\"\u003eZ06 Coupe kit\u003c\/a\u003e swaps in the coupe-specific parts. The rest of the range for this trim is in the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eCorvette C8 Z06\u003c\/a\u003e collection.\u003c\/p\u003e\n\u003ch2\u003eWhat Dry Carbon Buys You on a Seven-Piece Kit\u003c\/h2\u003e\n\u003cp\u003ePre-preg cloth comes with its resin already distributed through the weave at a controlled ratio, so the layup adds none by hand. Curing under heat and pressure in an autoclave then consolidates those plies and expels the air that would otherwise read as flaws in the finished surface. Where the resin goes in at the mold instead, the ratio is decided during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eSeven pieces hide less than nine. With the rear camera cover and the hatch trio gone, each remaining part carries more of the car, and a soft or cloudy panel has nowhere to blend in. All seven are cured the same way, in the finish you choose.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed. The finish you choose applies to every piece in the kit, including any add-on.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49303679402228,"sku":"FRL-C8ZCEBHTC","price":7299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/bundle_full-kit_with-caps-grille_2048.jpg?v=1789619216"},{"product_id":"2023-chevrolet-corvette-c8-carbon-fiber-z07-dive-planes-z06-e-ray-grand-sport","title":"2023-2027 Chevrolet Corvette C8 Carbon Fiber Z07 Dive Planes (Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe Z07 track package adds a set of dive planes at the front bumper corners — the single clearest visual signal that a C8 is set up for the track.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e and sold as a pair, left and right, finished together so the weave matches side to side.\u003c\/p\u003e\n\u003cp\u003eFits the 2023-2027 Chevrolet Corvette C8 Z06, 2024-2027 E-Ray and 2027 Grand Sport, Coupe and Convertible.\u003c\/p\u003e\n\u003ch2\u003eCheck Your Bumper Before Ordering\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThese are designed around the factory Z07 mounting points. A standard front bumper may require modification to fit.\u003c\/strong\u003e That is the one thing worth establishing before you buy, and it is worth being blunt about it rather than leaving it to the install.\u003c\/p\u003e\n\u003cp\u003eIf your car came with the Z07 package the mounting locations are already there and this is a bolt-on. If it did not, the bumper does not have them, and fitting these means your installer creating them — which is body work, not an afternoon in the driveway. Plenty of owners do exactly that and are happy with the result, but it should be a decision you made rather than a surprise you discovered.\u003c\/p\u003e\n\u003cp\u003eThe Z07 package is a Z06 option, so on an E-Ray or Grand Sport plan on your installer creating the mounting points.\u003c\/p\u003e\n\u003cp\u003eIf you want the sharper front end without that question, the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-front-spoiler-z06\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e and \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-grille-inserts-z06\"\u003eCarbon Fiber Front Grille Inserts\u003c\/a\u003e both mount to factory locations on the Z06, E-Ray and Grand Sport.\u003c\/p\u003e\n\u003cp\u003eSharpens the front end alongside those two parts, and the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-low-wing-z06\"\u003eCarbon Fiber Rear Low Wing\u003c\/a\u003e carries the same track-package look to the rear. Every Z06, E-Ray and Grand Sport Exterior Kit offers these as an optional add-on at checkout, at a lower price than buying them here.\u003c\/p\u003e\n\u003cp\u003eFits three trims — browse the \u003ca href=\"\/collections\/2023-corvette-c8-z06\"\u003eZ06\u003c\/a\u003e, \u003ca href=\"\/collections\/2024-corvette-c8-eray-carbon-fiber-parts\"\u003eE-Ray\u003c\/a\u003e and \u003ca href=\"\/collections\/2027-corvette-c8-grand-sport-carbon-fiber-parts\"\u003eGrand Sport\u003c\/a\u003e collections for the rest of the range.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA dive plane is a thin blade cantilevered off the bumper corner with nothing supporting its outer edge. There is nowhere for a flexible part to hide on a shape like this, and the leading edge is the first thing anyone looks at.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once the order has been placed.\u003c\/em\u003e\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":49329624613108,"sku":"FRL-C8ZDP","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8diveplanes.jpg?v=1789079643"},{"product_id":"c8-corvette-custom-steering-wheel","title":"2020-2027 C8 Corvette Custom Steering Wheel (Stingray, Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eBuilt for the C8 Corvette Stingray, Z06, E-Ray and Grand Sport, 2020-2027. One wheel, for one car. Yours.\u003c\/p\u003e\n\n\u003cp\u003eRace-style cores. Carbon, leather, Alcantara. You choose the core, the finish, the grip, the stitch color, the top stripe and the paddles when you order. Heated wheel from the factory? Select heating when you order and it stays heated.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eYou keep your original wheel.\u003c\/strong\u003e No core to send in. Nothing comes off the car until the new wheel arrives, so you keep driving. Airbag module, steering wheel controls and factory paddles are \u003cstrong\u003enot supplied\u003c\/strong\u003e: your installer moves them over from the original when the new wheel goes on.\u003c\/p\u003e\n\n\u003cp\u003eModel years, trims and button layouts vary. We contact you to confirm your year, trim and spec before anything is built.\u003c\/p\u003e\n\n\u003ch3\u003eThe spec\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCore: OEM shape, Sport (round top), Track (flat top) or Competition (cut top)\u003c\/li\u003e\n\u003cli\u003eCarbon: Standard Gloss, Matte, Honey Comb or Forged. Colored carbon on request\u003c\/li\u003e\n\u003cli\u003eGrip: leather, Alcantara or both, hand-stitched in your color\u003c\/li\u003e\n\u003cli\u003eHeating built in where your car has it\u003c\/li\u003e\n\u003cli\u003eAirbag, controls and paddles transfer from your original wheel at installation. Not supplied\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eShop \u003ca href=\"\/collections\/chevrolet-corvette-c8\"\u003eC8 Corvette carbon fiber parts\u003c\/a\u003e.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Default Title","offer_id":67683036201204,"sku":"FRL-CSW-C8","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/wO5hD.jpg?v=1791926058"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/collections\/Feral_Collection_2023CorvetteC8Z06.jpg?v=1791598113","url":"https:\/\/feralauto.com\/collections\/2023-corvette-c8-z06.oembed","provider":"Feral Auto","version":"1.0","type":"link"}