{"title":"Corvette C8 Stingray","description":"\u003cp\u003eThe Stingray is the broadest, most approachable C8 — the entry point for the widest range of owners, and the trim with the most genuinely exclusive carbon fiber in this catalog.\u003c\/p\u003e\n\u003cp\u003eSeveral parts here are built only for the Stingray's narrower factory body and will not fit the wide-body trims at all: the front spoiler, the side skirts, the Z51-shape high wing, the front intake vents, the boomerang engine intake side vents, and the two full exterior kits. A smaller set of trim parts — mirror caps, hatch vents and camera cover — does carry over to Z06, E-Ray, and Grand Sport.\u003c\/p\u003e\n\u003cp\u003eCoupe and Convertible take different hatch vents and kits, so pin down your body style first. Every listing states exactly which trims it fits, so you are not guessing whether a part is actually built for your Stingray or borrowed from a wider-body trim.\u003c\/p\u003e","products":[{"product_id":"chevrolet-corvette-c8-stingray-front-spoiler","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Front Spoiler (Stingray)","description":"\u003cp\u003eWhen the eighth-generation Corvette landed it was unlike anything Chevrolet had put out — the most race-inspired shape the nameplate had ever worn. The front spoiler underneath it is still painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The front spoiler mounts to the factory locations on your front fascia using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003epremium carbon fiber\u003c\/strong\u003e, shaped to the Stingray's own narrower bumper line — not a wide-body part adapted to fit.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-side-skirts\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e and \u003ca href=\"\/products\/c8-corvette-stingray-carbon-fiber-front-intake-vents\"\u003eCarbon Fiber Front Intake Vents\u003c\/a\u003e — all of it comes together in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eThis piece is premium carbon fiber — vacuum infused rather than autoclave cured like the rest of our C8 range, with resin drawn through the laminate under vacuum for consistent resin content and low void. It is real woven carbon under a clear finish — not a painted panel and not a wrap — and it is finished to the same 2x2 twill pattern and gloss level as the parts it sits beside, so the car reads as one build.\u003c\/p\u003e\n\u003cp\u003eA front spoiler is the lowest and most exposed part on the car. It meets driveway lips, parking blocks and road debris before anything else does, so rigidity and edge quality matter more here than anywhere else on the Corvette.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoney Comb Carbon\u003c\/strong\u003e — honey comb pattern carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Honey Comb, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e25-35 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":48019041091828,"sku":"FRL-C8SFS","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49288233615604,"sku":"FRL-C8SFS-MTE","price":1474.99,"currency_code":"USD","in_stock":true},{"title":"Honey Comb Carbon (+$150)","offer_id":49288241774836,"sku":"FRL-C8SFS-HCB","price":1549.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":48019041124596,"sku":"FRL-C8SFS-FRG","price":1649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/DSC07150.jpg?v=1776718206"},{"product_id":"chevrolet-corvette-c8-stingray-side-skirts","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Side Skirts (Stingray)","description":"\u003cp\u003eThe Stingray's flanks are the longest uninterrupted surface on the car, and from the factory the rockers under them are painted plastic.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The skirts mount to the factory rocker locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003epremium carbon fiber\u003c\/strong\u003e and sold as a pair, driver and passenger side, finished together so the weave and gloss match left to right. Cut to the Stingray's narrower body — the wide-body skirts will not clear.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-front-spoiler\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e and \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-boomerang-engine-intake-side-vents-stingray\"\u003eCarbon Fiber Boomerang Side Vents\u003c\/a\u003e to carry the same weave down the side. Everything together is the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003eThis piece is premium carbon fiber — vacuum infused rather than autoclave cured like the rest of our C8 range, with resin drawn through the laminate under vacuum for consistent resin content and low void. It is real woven carbon under a clear finish — not a painted panel and not a wrap — and it is finished to the same 2x2 twill pattern and gloss level as the parts it sits beside, so the car reads as one build.\u003c\/p\u003e\n\u003cp\u003eA side skirt is a long, shallow part with very little depth to stiffen it. That is exactly the shape that sags and chatters when the laminate is inconsistent, and it is the part people see from three feet away at every car meet.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHoney Comb Carbon\u003c\/strong\u003e — honey comb pattern carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Honey Comb, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e25-35 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":48019041157364,"sku":"FRL-C8SSS","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$75)","offer_id":49288233713908,"sku":"FRL-C8SSS-MTE","price":1474.99,"currency_code":"USD","in_stock":true},{"title":"Honey Comb Carbon (+$150)","offer_id":49288242069748,"sku":"FRL-C8SSS-HCB","price":1549.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$250)","offer_id":48019041222900,"sku":"FRL-C8SSS-FRG","price":1649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/DSC06988.jpg?v=1776718212"},{"product_id":"c8-corvette-carbon-fiber-hatch-vent-convertible","title":"2020-2027 C8 Corvette Carbon Fiber Hatch Vent (Stingray, Z06, E-Ray, Grand Sport) - Convertible","description":"\u003cp\u003eThe hatch vent on a C8 Convertible is painted plastic pretending to be a performance detail. Real carbon earns that spot honestly.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vent replaces the factory painted trim and mounts to the factory locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look on your C8. This part sits near the engine bay and takes constant sun with the top down, so it is finished with a UV-inhibiting, high-temperature-resistant clear coat built for exactly that environment.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e and \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eCarbon Fiber Mirror Caps\u003c\/a\u003e. Driving a Coupe? See the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eConvertible only — does not fit Coupe models.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThis part lives directly above the engine bay with nothing between it and the sun. Heat cycling is what separates a properly cured laminate from one that prints the weave through the clear coat after a season.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276637249780,"sku":"FRL-C8HV","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276637282548,"sku":"FRL-C8HV-MTE","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276637348084,"sku":"FRL-C8HV-RED","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276637380852,"sku":"FRL-C8HV-BLU","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276637315316,"sku":"FRL-C8HV-FRG","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8rearhatchvent.jpg?v=1789079942"},{"product_id":"c8-corvette-carbon-fiber-engine-hatch-vents-coupe","title":"2020-2027 C8 Corvette Carbon Fiber Engine Hatch Vents (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eThe engine hatch vents on a C8 Coupe are painted plastic dressed up to look like carbon. Real carbon earns that spot honestly.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents mount to the factory locations and reuse your factory mesh grills using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look, and sold as a matched pair, driver and passenger side. These sit directly over the engine bay and take real heat and constant sun, so they are finished with a UV-inhibiting, high-temperature-resistant clear coat built for that.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e and \u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eCarbon Fiber Rear Camera Cover\u003c\/a\u003e to finish the rear deck. Driving a Convertible? See the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-hatch-vent-convertible\"\u003eCarbon Fiber Hatch Vent\u003c\/a\u003e instead.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCoupe only — does not fit Convertible models.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThese parts live directly above the engine bay with nothing between them and the sun. Heat cycling is what separates a properly cured laminate from one that prints the weave through the clear coat after a season.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276653338868,"sku":"FRL-C8EHV","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276653371636,"sku":"FRL-C8EHV-MTE","price":999.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276653437172,"sku":"FRL-C8EHV-RED","price":1099.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276653469940,"sku":"FRL-C8EHV-BLU","price":1099.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276653404404,"sku":"FRL-C8EHV-FRG","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8decklidsidevents.jpg?v=1789079552"},{"product_id":"c8-corvette-carbon-fiber-lower-engine-hatch-trim","title":"2020-2027 C8 Corvette Carbon Fiber Lower Engine Hatch Trim (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eThe lower engine hatch trim is the piece that ties the rest of your rear deck carbon together — and from the factory it is painted plastic dressed up to look like the real thing.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The trim mounts to the factory locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look. This is a true replacement, not an overlay stuck on top of the factory piece.\u003c\/p\u003e\n\u003cp\u003eMeant to run with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e on a Coupe or the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-hatch-vent-convertible\"\u003eCarbon Fiber Hatch Vent\u003c\/a\u003e on a Convertible, so the whole rear deck reads as one surface instead of a patchwork of finishes.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eBecause this part sits right beside two other carbon parts, it is the one where a mismatch shows. Weave direction and gloss level have to agree across all three, and that comes from a controlled cure rather than a hand layup.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276670247156,"sku":"FRL-C8LEHT","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276670279924,"sku":"FRL-C8LEHT-MTE","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276670345460,"sku":"FRL-C8LEHT-RED","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276670378228,"sku":"FRL-C8LEHT-BLU","price":899.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276670312692,"sku":"FRL-C8LEHT-FRG","price":999.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8decklidlowerpanel_61ba22e9-102f-44b5-80af-3bf9ed5c8c39.jpg?v=1789079605"},{"product_id":"c8-corvette-stingray-carbon-fiber-front-intake-vents","title":"2020-2027 C8 Corvette Stingray Carbon Fiber Front Intake Vents","description":"\u003cp\u003eThe front intake vents on a C8 Stingray are painted plastic dressed up to look like carbon, sitting right at eye level on the most photographed angle of the car.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents mount to your factory tab locations using your existing hardware, with no bumper removal required — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look, and sold as a matched pair, driver and passenger side.\u003c\/p\u003e\n\u003cp\u003eFinishes the front alongside the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-front-spoiler\"\u003eCarbon Fiber Front Spoiler\u003c\/a\u003e, and is included in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFront bumper opening geometry varies across C8 trims, so this pair is fit-verified for Stingray only — not confirmed for Z06, E-Ray or Grand Sport at this time. Please confirm your exact trim before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThese sit at the front corners of the car where stone chips land first, and they are close enough to eye level that surface quality is judged from two feet away rather than across a parking lot.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276688335092,"sku":"FRL-C8SIV","price":599.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276688367860,"sku":"FRL-C8SIV-MTE","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276688433396,"sku":"FRL-C8SIV-RED","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276688466164,"sku":"FRL-C8SIV-BLU","price":799.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276688400628,"sku":"FRL-C8SIV-FRG","price":899.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8frontintakevents.jpg?v=1789079690"},{"product_id":"c8-corvette-stingray-carbon-fiber-high-wing-spoiler","title":"2020-2027 C8 Corvette Stingray Carbon Fiber High Wing Spoiler","description":"\u003cp\u003eThe factory Z51 high wing is the most aggressive design cue available on a C8 Stingray. In carbon it looks like it was always meant to be there.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e throughout — wing blade, stanchions and end plates. This is not a carbon skin wrapped over fiberglass; it is solid carbon everywhere, with removable end plates for easier cleaning and detailing. Treat it as an OEM-style structural and appearance upgrade — we do not publish performance numbers we have not measured ourselves.\u003c\/p\u003e\n\u003cp\u003eIf your Stingray came with the Z51 Performance Package, this wing mounts to your factory Z51 locations with no drilling required. On a non-Z51 car, use the included drill template to place the mounting holes accurately.\u003c\/p\u003e\n\u003cp\u003eFinishes the rear alongside the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003eCarbon Fiber Rear Diffuser\u003c\/a\u003e, and is included in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA wing is a long span carried on two stanchions, which makes it the part where a soft laminate shows up as visible flex at speed. Building the blade, stanchions and end plates in the same process is what keeps the gloss level consistent across three parts that sit inches apart.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276701081844,"sku":"FRL-C8SHW","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276701114612,"sku":"FRL-C8SHW-MTE","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276701180148,"sku":"FRL-C8SHW-RED","price":1599.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276701212916,"sku":"FRL-C8SHW-BLU","price":1599.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276701147380,"sku":"FRL-C8SHW-FRG","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8highwingspoiler.jpg?v=1789079778"},{"product_id":"c8-corvette-carbon-fiber-rear-diffuser-stingray","title":"2020-2027 C8 Corvette Carbon Fiber Rear Diffuser (Stingray, E-Ray, Grand Sport)","description":"\u003cp\u003eThe factory rear diffuser on your C8 already looks right. This one looks like it came from the same design studio, just a step further.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The diffuser reuses your factory clips and tab locations, and your factory mesh grill bolts directly into it using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in an OEM-style shape that stays true to the C8's factory design language rather than turning the rear end into something that looks bolted on from a track car. It is finished with a deep, multi-layer UV-inhibiting clear coat built to hold up to the heat, road debris and grime that come with sitting at the rear of the car.\u003c\/p\u003e\n\u003cp\u003ePairs with the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e and \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e to finish the whole rear. On a Stingray it is part of the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNot designed for Z06 — the Z06 requires a different diffuser due to differences in rear-end geometry and exhaust configuration. See the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-rear-diffuser-z06\"\u003eZ06 and Grand Sport Carbon Fiber Rear Diffuser\u003c\/a\u003e.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA diffuser sits low and directly behind the rear wheels, in the path of stone chips, road salt and exhaust heat. The strake edges are the detail that suffers first on a molded plastic part.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49276714418420,"sku":"FRL-C8SERD","price":1799.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49276714451188,"sku":"FRL-C8SERD-MTE","price":1899.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49276714516724,"sku":"FRL-C8SERD-RED","price":1999.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49276714549492,"sku":"FRL-C8SERD-BLU","price":1999.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49276714483956,"sku":"FRL-C8SERD-FRG","price":2099.99,"currency_code":"USD","in_stock":true}]},{"product_id":"chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Mirror Caps (Stingray, Z06, E-Ray, Grand Sport)","description":"\u003cp\u003eThe C8 already turns heads. The factory mirror caps are the easiest single spot on the car to level up, and the one most people leave alone.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The factory cover comes off and the carbon cap goes on in its place using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave designed to match the factory carbon look on your C8, and sold as a pair, driver and passenger side. These are true replacements for your factory covers, not stick-on overlays hiding what is underneath.\u003c\/p\u003e\n\u003cp\u003eFits every C8 trim. Pairs with the \u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eCarbon Fiber Rear Camera Cover\u003c\/a\u003e and, on a wide-body car, the \u003ca href=\"\/products\/2023-chevrolet-corvette-c8-carbon-fiber-quarter-panel-door-handle-side-scoop-z06\"\u003eCarbon Fiber Quarter Panel Side Scoops\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eA mirror cap is a small, tightly curved part that people see up close, at arm's length, every time they get in the car. There is no distance to hide behind on a part like this — the weave has to lie down cleanly around the compound curve.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49288212381940,"sku":"FRL-C8MC","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49288212447476,"sku":"FRL-C8MC-MTE","price":599.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49288212480244,"sku":"FRL-C8MC-RED","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49288212513012,"sku":"FRL-C8MC-BLU","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49288212414708,"sku":"FRL-C8MC-FRG","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8mirrorcovers.jpg?v=1789079739"},{"product_id":"chevrolet-corvette-c8-carbon-fiber-boomerang-engine-intake-side-vents-stingray","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Boomerang Engine Intake Side Vents (Stingray)","description":"\u003cp\u003eThe C8 Stingray has some of the most distinctive lines in the game, and the side intake vents sit right in the middle of that look. Enthusiasts call them the boomerangs.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The vents replace the factory side intake trim at the OEM attachment points on your doors and fenders using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave that matches the factory carbon look. Four pieces total, two per side, finished together so the weave matches across the car. These are true replacements, not stick-on overlays covering what is underneath.\u003c\/p\u003e\n\u003cp\u003eRuns with the \u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-side-skirts\"\u003eCarbon Fiber Side Skirts\u003c\/a\u003e down the flanks, and is included in the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Carbon Fiber Exterior Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThese parts span the gap between a door and a fender, which means they have to hold their shape against two panels that move independently. A four-piece set also has to agree with itself across the car, and that comes from curing them in one run.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49288212578548,"sku":"FRL-C8SQPSS","price":1299.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49288212644084,"sku":"FRL-C8SQPSS-MTE","price":1399.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49288212676852,"sku":"FRL-C8SQPSS-RED","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49288212709620,"sku":"FRL-C8SQPSS-BLU","price":1499.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49288212611316,"sku":"FRL-C8SQPSS-FRG","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8handlecover_sidescooptrim.jpg?v=1789097665"},{"product_id":"2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Rear Camera Cover (Stingray, Z06, E-Ray, Grand Sport) - Coupe","description":"\u003cp\u003eThe rear hatch on a C8 Coupe is loaded with detail, and the rear camera cover is the one spot everybody overlooks — until they see it done in carbon.\u003c\/p\u003e\n\u003cp\u003eThis is a direct replacement, not a modification. The cover mounts to the factory clips and mounting locations using your existing hardware — nothing to drill, nothing to cut, nothing permanent. No additional hardware is included, and none is required.\u003c\/p\u003e\n\u003cp\u003eBuilt from \u003cstrong\u003eautoclaved 2x2 pre-preg dry carbon fiber\u003c\/strong\u003e in a 3K 2x2 twill weave designed to match the factory carbon look. This is a true replacement, not a taped-on overlay sitting on top of the factory cover, and it includes a 3D printed camera receiver to keep your rear camera properly aligned.\u003c\/p\u003e\n\u003cp\u003eFinishes the rear deck alongside the \u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eCarbon Fiber Engine Hatch Vents\u003c\/a\u003e and \u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eCarbon Fiber Lower Engine Hatch Trim\u003c\/a\u003e. Pairs naturally with the \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eCarbon Fiber Mirror Caps\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCoupe only — does not fit C8 Convertible models.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhy Autoclave Pre-Preg Dry Carbon Fiber\u003c\/h2\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eThis part has to hold a camera in precise alignment while looking like trim. Dimensional stability through the cure is the whole job here, and that is exactly what an autoclave gives you over a hand layup.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed Carbon\u003c\/strong\u003e — red-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlue Carbon\u003c\/strong\u003e — blue-tinted carbon weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte, Red, Blue, and Forged Carbon finishes are non-refundable once production has started.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49288213758196,"sku":"FRL-C8RCC","price":499.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$100)","offer_id":49288213823732,"sku":"FRL-C8RCC-MTE","price":599.99,"currency_code":"USD","in_stock":true},{"title":"Red Carbon (+$200)","offer_id":49288213856500,"sku":"FRL-C8RCC-RED","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Blue Carbon (+$200)","offer_id":49288213889268,"sku":"FRL-C8RCC-BLU","price":699.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$300)","offer_id":49288213790964,"sku":"FRL-C8RCC-FRG","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/files\/C8rearcameradecklid.jpg?v=1789079817"},{"product_id":"chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Exterior Kit (Stingray) - Coupe","description":"\u003cp\u003eA front spoiler changes the front of the car. A full kit changes the car. Every exterior surface on the C8 Stingray Coupe that Feral Auto makes in carbon, ordered as one set and built in one production run.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-front-spoiler\"\u003eFront Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-stingray-carbon-fiber-high-wing-spoiler\"\u003eHigh Wing Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SHW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-side-skirts\"\u003eSide Skirts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003eRear Diffuser\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SERD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-stingray-carbon-fiber-front-intake-vents\"\u003eFront Intake Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SIV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-boomerang-engine-intake-side-vents-stingray\"\u003eBoomerang Engine Intake Side Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SQPSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-engine-hatch-vents-coupe\"\u003eEngine Hatch Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8EHV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-lower-engine-hatch-trim\"\u003eLower Engine Hatch Trim\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8LEHT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eMirror Caps\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8MC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/2020-chevrolet-corvette-c8-carbon-fiber-rear-camera-cover-stingray-z06-e-ray-coupe\"\u003eRear Camera Cover\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8RCC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrdered as a kit these cost less than buying them one at a time, and every finish upgrade costs less inside the kit than outside it.\u003c\/p\u003e\n\u003cp\u003eDriving a Convertible? The \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-htc\"\u003eStingray Convertible kit\u003c\/a\u003e swaps the coupe-only parts for their Convertible equivalents.\u003c\/p\u003e\n\u003ch2\u003eMaterials in This Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eThe front spoiler and side skirts are premium carbon fiber. Every other piece in this kit is autoclaved pre-preg dry carbon fiber.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eWhichever process a piece is built to, every part in this kit is finished to the same 2x2 twill pattern and the same gloss level, in the same production run. That is what makes a multi-part order read as one set on the car rather than a stack of separate purchases that happen to arrive on the same truck. It is the part you cannot buy back later by ordering pieces one at a time.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once production has started. The finish you choose applies to every piece in the kit.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e2020-2027 Chevrolet Corvette C8 Stingray Coupe only.\u003c\/strong\u003e Does not fit Convertible models, and the Stingray parts in this kit will not fit the wide-body Z06, E-Ray or Grand Sport. The rear camera cover and engine hatch vents are coupe-specific parts. If your Stingray is not Z51-equipped, the high wing ships with a drill template for accurate mounting hole placement.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49303828660468,"sku":"FRL-C8SCEBCPE","price":9099.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$800)","offer_id":49303828693236,"sku":"FRL-C8SCEBCPE-MTE","price":9899.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$2,500)","offer_id":49303828726004,"sku":"FRL-C8SCEBCPE-FRG","price":11599.99,"currency_code":"USD","in_stock":true}]},{"product_id":"chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-htc","title":"2020-2027 Chevrolet Corvette C8 Carbon Fiber Exterior Kit (Stingray) - Convertible","description":"\u003cp\u003eA front spoiler changes the front of the car. A full kit changes the car. Every exterior surface on the C8 Stingray Convertible that Feral Auto makes in carbon, ordered as one set and built in one production run.\u003c\/p\u003e\n\u003ch2\u003eWhat's Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-front-spoiler\"\u003eFront Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SFS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-stingray-carbon-fiber-high-wing-spoiler\"\u003eHigh Wing Spoiler\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SHW\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-stingray-side-skirts\"\u003eSide Skirts\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-rear-diffuser-stingray\"\u003eRear Diffuser\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SERD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-stingray-carbon-fiber-front-intake-vents\"\u003eFront Intake Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SIV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-boomerang-engine-intake-side-vents-stingray\"\u003eBoomerang Engine Intake Side Vents\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8SQPSS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/c8-corvette-carbon-fiber-hatch-vent-convertible\"\u003eHatch Vent\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8HV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-mirror-caps-stingray-z06-e-ray\"\u003eMirror Caps\u003c\/a\u003e\u003c\/strong\u003e — FRL-C8MC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrdered as a kit these cost less than buying them one at a time, and every finish upgrade costs less inside the kit than outside it.\u003c\/p\u003e\n\u003cp\u003eDriving a Coupe? The \u003ca href=\"\/products\/chevrolet-corvette-c8-carbon-fiber-exterior-kit-stingray-coupe\"\u003eStingray Coupe kit\u003c\/a\u003e swaps in the coupe-specific parts.\u003c\/p\u003e\n\u003ch2\u003eMaterials in This Kit\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eThe front spoiler and side skirts are premium carbon fiber. Every other piece in this kit is autoclaved pre-preg dry carbon fiber.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePre-preg carbon arrives with the resin already impregnated into the weave at a controlled ratio, so no resin is added by hand during layup — that is what makes it dry carbon. Curing it under heat and pressure in an autoclave consolidates the laminate and drives out trapped air that would otherwise show as flaws in the finished surface. Other processes introduce the resin at the mold, so the ratio is set during layup rather than before it.\u003c\/p\u003e\n\u003cp\u003eWhichever process a piece is built to, every part in this kit is finished to the same 2x2 twill pattern and the same gloss level, in the same production run. That is what makes a multi-part order read as one set on the car rather than a stack of separate purchases that happen to arrive on the same truck. It is the part you cannot buy back later by ordering pieces one at a time.\u003c\/p\u003e\n\u003ch2\u003eAvailable Carbon Finishes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss (Standard)\u003c\/strong\u003e — our standard high-gloss 2x2 twill weave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatte Carbon\u003c\/strong\u003e — same weave, low-sheen matte finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForged Carbon\u003c\/strong\u003e — marbled, high-strength forged carbon pattern\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note: Matte and Forged Carbon finishes are non-refundable once production has started. The finish you choose applies to every piece in the kit.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003e2020-2027 Chevrolet Corvette C8 Stingray Convertible only.\u003c\/strong\u003e Does not fit Coupe models, and the Stingray parts in this kit will not fit the wide-body Z06, E-Ray or Grand Sport. The hatch vent is a Convertible-specific (HTC) part. If your Stingray is not Z51-equipped, the high wing ships with a drill template for accurate mounting hole placement.\u003c\/p\u003e\n\u003ch2\u003eCurrent Lead Time\u003c\/h2\u003e\n\u003cp\u003eCurrent estimated lead time is approximately \u003cstrong\u003e55-65 business days\u003c\/strong\u003e from order to ship.\u003c\/p\u003e","brand":"Feral Auto","offers":[{"title":"Standard Gloss","offer_id":49303829610740,"sku":"FRL-C8SCEBHTC","price":7999.99,"currency_code":"USD","in_stock":true},{"title":"Matte Carbon (+$600)","offer_id":49303829643508,"sku":"FRL-C8SCEBHTC-MTE","price":8599.99,"currency_code":"USD","in_stock":true},{"title":"Forged Carbon (+$1,900)","offer_id":49303829676276,"sku":"FRL-C8SCEBHTC-FRG","price":9899.99,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0822\/6550\/6036\/collections\/Feral_Collection_2023CorvetteC8Z06_9b266b35-2c3e-4cc3-99d2-8f4ff6ee050f.jpg?v=1788897794","url":"https:\/\/feralauto.com\/collections\/2020-corvette-c8-stingray-carbon-fiber-parts.oembed","provider":"Feral Auto","version":"1.0","type":"link"}